Sample Record
Owner Lab
- CT D12 - Huntington Beach Field Laboratory
DIME Sample ID 2022-11-29-18
Project Information
Project Identifiers | Project ID: 214951 DEA: 120K0234 EFIS: 1214000100 |
---|---|
DIST-CO-RTE-PM | 12-ORA-5-17.1/18.9 |
Award Date | 09/23/2020 |
Closeout Date | Not set |
Work Description | South County Improvement Project (Phase 3 - El Toro/Alicia) WIDEN FREEWAY AND BRIDGES, RECONSTRUCT BRIDGE AND WALLS. |
Location Description | ORANGE COUNTY IN MISSION VIEJO, LAGUNA HILLS, LAGUNA WOODS AND LAKE FOREST FROM 0.4 MILE SOUTH OF ALICIA PARKWAY OVERCROSSING TO 0.2 MILE NORTH OF EL TORO ROAD UNDERCROSSING |
QA Service Level | 1 (Verified on 10/01/2020) |
Sample Information
Sample Taken Date | 11/29/2022 | Sample Unique Key | 18 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/29/2022 |
Sample type | Quality Assurance | A brief description of the sample | 3/8 Aggregate and Sand |
The quantity of what the sample constitutes | Two Bags | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Vincent | Last name of sampler or witnessed by | Tran |
Title of sampler | Transportation Engineer Technician | Telephone number of sampler | (949)473-4006 |
Laboratory sample identification | 22-1190 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Robertson's Ready Mix Lake Forest | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA or name of Pit) | 91-33-0061, 91-36-0072 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | 18 | A detailed description of where the material sample was collected | Conveyor Belt |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/8 inch | |
The concrete mix design number | RRM20147 | Lot number | |
Sublot number | Aggregate Mix Number |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|---|
2022-11-29-18-1 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Vincent Tran | CT D12 - Huntington Beach Field Laboratory | 11/29/2022 | Vincent Tran | No | Info | ||
2022-11-29-18-2 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Vincent Tran | CT D12 - Huntington Beach Field Laboratory | 11/29/2022 | Vincent Tran | No | Info | ||
2022-11-29-18-3 | CTM 217-June 2011: Method of Test for Sand Equivalent | Vincent Tran | CT D12 - Huntington Beach Field Laboratory | 11/29/2022 | Vincent Tran | No | The SE value = 73 is OUT of the O.R., but within the C.C. | Info | |
2022-11-29-18-4 | CTM 227-December 2014: Method of Test for Evaluating Cleanness of Coarse Aggregate (Cleanness) | Vincent Tran | CT D12 - Huntington Beach Field Laboratory | 11/29/2022 | Vincent Tran | No | Info | ||
2022-11-29-18-5 | CTM 226-July 2010: Method of Test for Determination of Moisture Content of Soils and Aggregates by Oven Drying | Vincent Tran | CT D12 - Huntington Beach Field Laboratory | 11/29/2022 | Vincent Tran | No | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
22-1190 | 12/01/2022 | Info |
Test File Attachments
DIME Test ID: 2022-11-29-18-1 CTM 202-November 2011
DIME Test ID: 2022-11-29-18-2 CTM 202-November 2011
DIME Test ID: 2022-11-29-18-3 CTM 217-June 2011
DIME Test ID: 2022-11-29-18-4 CTM 227-December 2014
DIME Test ID: 2022-11-29-18-5 CTM 226-July 2010