Sample Record
Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2022-11-12-1
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 214402 DEA: 010E7704 EFIS: 0115000009 |
|---|---|
| DIST-CO-RTE-PM | 01-HUM-101-R17.9/87.8 |
| Award Date | 01/21/2020 |
| Closeout Date | 07/21/2023 |
| Work Description | STRENGTHEN 2 BRIDGES. |
| Location Description | HUMBOLDT COUNTY AT SOUTH FORK EEL RIVER AND SEPARATION AND AT ARCATA OVERHEAD |
| QA Service Level | 1 (Verified on 09/16/2019) |
Sample Information
| Sample Taken Date | 11/12/2022 | Sample Unique Key | 1 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/16/2022 |
| Sample type | Quality Assurance | A brief description of the sample | A325 HDG BOLT ASSEMBLY |
| The quantity of what the sample constitutes | 126 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Bob | Last name of sampler or witnessed by | Haywood |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | NUCOR | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | 100103163 | Nut Mfg. Lot Number(s) | 469414B |
| Washer Mfg. Lot Number(s) | E0506 | Bolt Specification | A325 |
| Bolt Length(s) | 5.5 | Nut Specification | A563 |
| Washer Specification | F436 | Finish | HDG |
| Diameter/Size | 0.875 | Bolt Mfg. Lot Number | 439359A |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) |
Submitted Tests
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2022-11-12-1-1 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-11-12-1-2 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-11-12-1-3 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-11-12-1-4 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-11-12-1-5 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-11-12-1-6 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-11-12-1-7 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-11-12-1-8 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-11-12-1-9 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-11-12-1-10 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-11-12-1-11 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-11-12-1-12 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-11-12-1-13 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-11-12-1-14 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-11-12-1-15 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-11-12-1-16 ASTM E18-20 (Verified)
DIME Test ID: 2022-11-12-1-17 ASTM E18-20 (Verified)
DIME Test ID: 2022-11-12-1-18 ASTM E18-20 (Verified)
DIME Test ID: 2022-11-12-1-19 ASTM F606-21 (Verified)
DIME Test ID: 2022-11-12-1-20 ASTM F606-21 (Verified)
DIME Test ID: 2022-11-12-1-21 ASTM F606-21 (Verified)