Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2022-10-21-38

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214666
DEA: 022H8104
EFIS: 0217000012
DIST-CO-RTE-PM02-TRI-299-1.67/45.12
Award Date03/03/2022
Closeout Date08/11/2023
Work DescriptionTRINITY CULVERTS
Location DescriptionCULVERT REHABILITATION IN TRINITY COUNTY NEAR SALYER AT VARIOUS LOCATIONS FROM 0.1 MILE WEST OF WHITE HOUSE GULCH ROAD TO 0.4 MILE WEST OF SLATTERY POND ROAD.
QA Service Level1 (Verified on 03/02/2020)

Sample Information

Sample Taken Date10/21/2022 Sample Unique Key38
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing10/21/2022
Sample typeAcceptance A brief description of the sample16 boxes of Lime Treated 3/4-inch Type A HMA (eq. PG 64-28 M) with 24.0% RAP and virgin PG 58-34 M from Valero (Benicia, CA)
The quantity of what the sample constitutesProduction Start-Up Evaluation From where was the sample collectedManufacturer
First name of sampler or witnessed byJD Last name of sampler or witnessed byAtkinson
Title of samplerConsultant Telephone number of sampler
Laboratory sample identificationD79176 Linked DIME Sample ID
The fabricator/manufacturer/facility nameTullis – Northstate Asphalt (Redding, CA) Transportation Laboratory (TL) Number858105
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number HMA Mix Number

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2022-10-21-38-1AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory10/24/2022Darrell Valasek
Yes
10/31/2022
2022-10-21-38-2AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Karen Dorado, CT D02 - Redding Northern Regional Laboratory10/21/2022Darrell Valasek
Yes
10/31/2022
2022-10-21-38-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory10/24/2022Darrell Valasek
Yes
10/31/2022
2022-10-21-38-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory10/24/2022Darrell Valasek
Yes
10/31/2022VMA = 13.4%, VFA = 73.8%, DP = 1.2
2022-10-21-38-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Colt Sweeny and Dennis Hickey, CT D02 - Redding Northern Regional Laboratory10/28/2022Darrell Valasek
Yes
10/31/2022
2022-10-21-38-6CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltColt Sweeny, CT D02 - Redding Northern Regional Laboratory10/27/2022Ward Jenkins
Yes
10/31/2022

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2022-10-21-38-1 AASHTO T209-12 (Verified)
DIME Test ID: 2022-10-21-38-2 AASHTO T308-10 (Verified)
DIME Test ID: 2022-10-21-38-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2022-10-21-38-4 AASHTO T269-14 (Verified)
DIME Test ID: 2022-10-21-38-5 AASHTO T283-14 (Verified)
DIME Test ID: 2022-10-21-38-6 CTM 389-19 (Verified)