Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2022-08-29-54

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 993299
DEA: 022J3904
EFIS: 0221000073
DIST-CO-RTE-PM02-SHA-44-45.5/51.6
Award Date11/16/2021
Closeout Date11/23/2022
Work DescriptionHMA OVERLAY, REPLACE AC SURFACING AND SHOULDER BACKING.
Location DescriptionSHASTA COUNTY NEAR VIOLA FROM 3.0 MILES EAST OF DEER FLAT ROAD TO 0.5 MILE EAST OF BRIDGE CREEK ROAD
QA Service Level1 (Verified on 10/18/2021)

Sample Information

Sample Taken Date08/29/2022 Sample Unique Key54
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/29/2022
Sample typeDepartment Acceptance A brief description of the sample16 boxes of Lime Treated 1/2-inch Type A HMA-A with 25.0% RAP and virgin PG 58-22 from Valero – Benecia
The quantity of what the sample constitutesProduction Start Up-Evaluation From where was the sample collectedManufacturer
First name of sampler or witnessed byCindy Last name of sampler or witnessed byBryant
Title of samplerTET Telephone number of sampler
Laboratory sample identificationD79142 Linked DIME Sample ID
The fabricator/manufacturer/facility nameTullis – Northstate Asphalt (Redding, CA) Transportation Laboratory (TL) Number866064
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot number
Sublot number HMA Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2022-08-29-54-1AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory08/30/2022Darrell Valasek
Yes
09/09/2022
2022-08-29-54-2AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Arthur Mills, CT D02 - Redding Northern Regional Laboratory08/30/2022Darrell Valasek
Yes
09/09/2022
2022-08-29-54-4AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory08/30/2022Darrell Valasek
Yes
09/09/2022
2022-08-29-54-5AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory08/30/2022Darrell Valasek
Yes
09/09/2022VMA = 15.3%, VFA = 69.1%, DP = 1.1
2022-08-29-54-6AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory09/08/2022Darrell Valasek
Yes
09/09/2022
2022-08-29-54-7AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)Arthur Mills, CT D02 - Redding Northern Regional Laboratory08/31/2022Ward Jenkins
Yes
09/09/2022Corrected Post Plant Gradation. Specimen is coarse on the 3/4-inch sieve.

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2022-08-29-54-1 AASHTO T209-12 (Verified)
DIME Test ID: 2022-08-29-54-2 AASHTO T308-10 (Verified)
DIME Test ID: 2022-08-29-54-4 AASHTO T275-07r12 (Verified)
DIME Test ID: 2022-08-29-54-5 AASHTO T269-14 (Verified)
DIME Test ID: 2022-08-29-54-6 AASHTO T283-14 (Verified)
DIME Test ID: 2022-08-29-54-7 AASHTO T30-19 (Verified)