Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2022-07-01-26

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214402
DEA: 010E7704
EFIS: 0115000009
DIST-CO-RTE-PM01-HUM-101-R17.9/87.8
Award Date01/21/2020
Closeout Date07/21/2023
Work DescriptionSTRENGTHEN 2 BRIDGES.
Location DescriptionHUMBOLDT COUNTY AT SOUTH FORK EEL RIVER AND SEPARATION AND AT ARCATA OVERHEAD
QA Service Level1 (Verified on 09/16/2019)

Sample Information

Sample Taken Date07/01/2022 Sample Unique Key26
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/05/2022
Sample typeQuality Assurance A brief description of the sampleA325 Bolts
The quantity of what the sample constitutes61 From where was the sample collectedJob Site
First name of sampler or witnessed byHunter Last name of sampler or witnessed byMonnot
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameBirmingham Fastener Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)
Heat Number(s)1000213628 Nut Mfg. Lot Number(s)465436B
Washer Mfg. Lot Number(s)E2081 Bolt SpecificationA325
Bolt Length(s)4.75" Nut SpecificationA563
Washer SpecificationF436 FinishHDG
Diameter/Size1" Bolt Mfg. Lot Number466739A
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2022-07-01-26-1ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory07/07/2022spaine
Yes
07/11/2022A325 Wedge Tensile
2022-07-01-26-2ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)<None>, CT HQ - Sacramento Structural Materials Testing Laboratory07/07/2022<None>
Yes
07/11/2022Nut Proof Load
2022-07-01-26-3ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory07/07/2022Steven Paine
Yes
07/11/2022
2022-07-01-26-4ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory07/07/2022Steven Paine
Yes
07/11/2022
2022-07-01-26-5ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory07/07/2022Steven Paine
Yes
07/11/2022
2022-07-01-26-6ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory07/07/2022Steven Paine
Yes
07/11/2022
2022-07-01-26-7ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory07/07/2022Steven Paine
Yes
07/11/2022
2022-07-01-26-8ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory07/07/2022Steven Paine
Yes
07/11/2022
2022-07-01-26-9ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory07/07/2022Steven Paine
Yes
07/11/2022
2022-07-01-26-10ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory07/07/2022Steven Paine
Yes
07/11/2022

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2022-07-01-26-1 ASTM F606-21 (Verified)
DIME Test ID: 2022-07-01-26-2 ASTM F606-21 (Verified)
DIME Test ID: 2022-07-01-26-3 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-07-01-26-4 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-07-01-26-5 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-07-01-26-6 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-07-01-26-7 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-07-01-26-8 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-07-01-26-9 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-07-01-26-10 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-07-01-26-11 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-07-01-26-12 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-07-01-26-13 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-07-01-26-14 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-07-01-26-15 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-07-01-26-16 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-07-01-26-17 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-07-01-26-18 ASTM E18-20 (Verified)
DIME Test ID: 2022-07-01-26-19 ASTM E18-20 (Verified)