Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2022-06-13-31

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 993343
DEA: 022J3604
EFIS: 0221000070
DIST-CO-RTE-PM02-TEH-36-67.5/R75.1
Award Date12/02/2021
Closeout Date07/25/2022
Work DescriptionASPHALT-RUBBER BINDER, SEAL COAT & REPLACE ASPHALT CONCRETE SURFACING.
Location DescriptionTEHAMA COUNTY NEAR MINERAL FROM 0.2 MILE EAST OF LATKA ROAD TO 0.1 MILE EAST OF LITTLE GIANT MILL ROAD
QA Service Level1 (Verified on 11/01/2021)

Sample Information

Sample Taken Date06/13/2022 Sample Unique Key31
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/13/2022
Sample typeAcceptance A brief description of the sampleLime Treated 1/2-inch Type A HMA (eq. PG 64-16) with 25.0% RAP and virgin PG 58-22 from Valero - Benicia
The quantity of what the sample constitutesProduction Start-Up Evaluation From where was the sample collectedManufacturer
First name of sampler or witnessed byCindy Last name of sampler or witnessed byBryant
Title of samplerTET Telephone number of sampler
Laboratory sample identificationD79050 Linked DIME Sample ID
The fabricator/manufacturer/facility nameTullis Inc. - Northstate Asphalt (Redding, CA) Transportation Laboratory (TL) Number708125
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot number
Sublot number HMA Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2022-06-13-31-1AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory06/14/2022Darrell Valasek
Yes
06/27/2022
2022-06-13-31-2AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Arthur Mills, CT D02 - Redding Northern Regional Laboratory06/15/2022Darrell Valasek
Yes
06/27/2022
2022-06-13-31-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory06/14/2022Darrell Valasek
Yes
06/27/2022
2022-06-13-31-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory06/14/2022Darrell Valasek
Yes
06/27/2022VMA = 14.9%, VFA = 76.6%, DP = 1.0
2022-06-13-31-5AASHTO T312-14: Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor (Method of Compaction)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory06/14/2022Darrell Valasek
Yes
06/27/2022
2022-06-13-31-6AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory06/21/2022Darrell Valasek
No
Info

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2022-06-13-31-1 AASHTO T209-12 (Verified)
DIME Test ID: 2022-06-13-31-2 AASHTO T308-10 (Verified)
DIME Test ID: 2022-06-13-31-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2022-06-13-31-4 AASHTO T269-14 (Verified)
DIME Test ID: 2022-06-13-31-5 AASHTO T312-14 (Verified)
DIME Test ID: 2022-06-13-31-6 AASHTO T283-14