Sample Record
Owner Lab
- CT D11 - District 11 Materials Laboratory
DIME Sample ID 2022-06-06-8
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 215257 DEA: 11056374 EFIS: 1117000087 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-11-0.6/2.7 |
| Award Date | 02/16/2021 |
| Closeout Date | Not set |
| Work Description | CONSTRUCT INTERCHANGE, PLACE JPCP, HMA, AND INSTALL LIGHTING. |
| Location Description | SAN DIEGO COUNTY NEAR SAN DIEGO FROM 0.2 MILE WEST OF SANYO AVENUE UNDERCROSSING TO 1.2 MILE EAST OF ENRICO FERMI DRIVE OVERCROSSING |
| QA Service Level | 1 (Verified on 11/25/2020) |
Sample Information
| Sample Taken Date | 06/06/2022 | Sample Unique Key | 8 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/07/2022 |
| Sample type | Quality Assurance | A brief description of the sample | 3/4" HMA PSU |
| The quantity of what the sample constitutes | 3 bags, 12 boxes, 3 cans | From where was the sample collected | Source |
| First name of sampler or witnessed by | David | Last name of sampler or witnessed by | Walker |
| Title of sampler | Telephone number of sampler | 8582480978 | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | CCA Lakeside | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | |
| Sublot number | HMA Mix Number | Not set |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|
| 2022-06-06-8-1 | AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content) | Daniel Smith, CT D11 - District 11 Materials Laboratory | 06/07/2022 | Daniel Smith | No | Info | ||
| 2022-06-06-8-2 | AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content) | Daniel Smith, CT D11 - District 11 Materials Laboratory | 06/08/2022 | Daniel Smith | No | Oil Content for RAP | Info | |
| 2022-06-06-8-4 | AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void) | Shawn Lynn, CT D11 - District 11 Materials Laboratory | 06/07/2022 | Shawn Lynn | No | 4139-PSU 056374 | Info | |
| 2022-06-06-8-5 | AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity) | Shawn Lynn, CT D11 - District 11 Materials Laboratory | 06/07/2022 | Shawn Lynn | No | 4139-PSU 056374 | Info | |
| 2022-06-06-8-6 | AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content) | Shawn Lynn, CT D11 - District 11 Materials Laboratory | 06/15/2022 | Shawn Lynn | No | 4139-PSU 056374 | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2022-06-06-8-1 AASHTO T308-10
DIME Test ID: 2022-06-06-8-2 AASHTO T308-10
DIME Test ID: 2022-06-06-8-4 AASHTO T269-14
DIME Test ID: 2022-06-06-8-5 AASHTO T275-07r12
DIME Test ID: 2022-06-06-8-6 AASHTO T283-14