Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2022-04-13-56
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 214402 DEA: 010E7704 EFIS: 0115000009 |
DIST-CO-RTE-PM | 01-HUM-101-R17.9/87.8 |
Award Date | 01/21/2020 |
Closeout Date | Not set |
Work Description | STRENGTHEN 2 BRIDGES. |
Location Description | HUMBOLDT COUNTY AT SOUTH FORK EEL RIVER AND SEPARATION AND AT ARCATA OVERHEAD |
QA Service Level | 1 (Verified on 09/16/2019) |
Sample Information
Sample Taken Date | 04/13/2022 |
Sample Unique Key | 56 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 04/26/2022 |
Sample type | Quality Assurance |
A brief description of the sample | A325 Bolts |
The quantity of what the sample constitutes | 58 |
From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Hunter |
Last name of sampler or witnessed by | Monnot |
Title of sampler | |
Telephone number of sampler | |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | KT Bolt |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
Heat Number(s) | 58050150 |
Nut Mfg. Lot Number(s) | |
Washer Mfg. Lot Number(s) | |
Bolt Specification | A325 |
Bolt Length(s) | 12.5" |
Nut Specification | na |
Washer Specification | na |
Finish | HDG |
Diameter/Size | 1" |
Bolt Mfg. Lot Number | 70085-4 |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2022-04-13-56-1 | ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/03/2022 | spaine | Yes | 05/11/2022 | A325 Wedge Tensile | |
2022-04-13-56-2 | ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/10/2022 | Steven Paine | Yes | 05/11/2022 | | |
2022-04-13-56-3 | ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/10/2022 | Steven Paine | Yes | 05/11/2022 | | |
2022-04-13-56-4 | ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/10/2022 | Steven Paine | Yes | 05/11/2022 | | |
2022-04-13-56-5 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/10/2022 | Steven Paine | Yes | 05/11/2022 | | |
2022-04-13-56-6 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/10/2022 | Steven Paine | Yes | 05/11/2022 | | |
2022-04-13-56-7 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/10/2022 | Steven Paine | Yes | 05/11/2022 | | |
159654160440160441160442160443160444160445