Sample Record
Owner Lab
- CT D11 - District 11 Materials Laboratory
DIME Sample ID 2022-04-27-9
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 993271 DEA: 11430604 EFIS: 1119000026 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-8,805-5.6/17.4 |
| Award Date | 11/16/2021 |
| Closeout Date | Not set |
| Work Description | INSTALL HIGH FRICTION SURFACE TREATMENT |
| Location Description | FOR CONSTRUCTION ON STATE HIGHWAY IN SAN DIEGO COUNTY IN SAN DIEGO ON ROUTE 8 AT ROUTE 15/8 SEPARATION AND ON ROUTE 805 AT NORTHBOUND 805 TO EASTBOUND 8 CONNECTOR |
| QA Service Level | 1 (Verified on 04/08/2022) |
Sample Information
| Sample Taken Date | 04/27/2022 | Sample Unique Key | 9 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/28/2022 |
| Sample type | Quality Assurance | A brief description of the sample | 3/4" RHMA-G |
| The quantity of what the sample constitutes | 12 boxes, 2 bags, 3 cans | From where was the sample collected | Source |
| First name of sampler or witnessed by | MARCO | Last name of sampler or witnessed by | ESTUDILLO |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Vulcan Otay | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | |
| Sublot number | HMA Mix Number | Not set |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|
| 2022-04-27-9-1 | AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content) | Shawn Lynn, CT D11 - District 11 Materials Laboratory | 05/04/2022 | Shawn Lynn | No | 5801-JMFR 11-430604 Fail | Info | |
| 2022-04-27-9-2 | AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity) | Shawn Lynn, CT D11 - District 11 Materials Laboratory | 05/02/2022 | Shawn Lynn | No | 2801-JMFR 11-430604 | Info | |
| 2022-04-27-9-3 | AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void) | Shawn Lynn, CT D11 - District 11 Materials Laboratory | 05/13/2022 | Shawn Lynn | No | 5801-JMFR 11-2T2184 | Info | |
| 2022-04-27-9-4 | AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity) | Shawn Lynn, CT D11 - District 11 Materials Laboratory | 05/13/2022 | Shawn Lynn | No | 5801-JMFR 11-430604 | Info | |
| 2022-04-27-9-5 | AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content) | Shawn Lynn, CT D11 - District 11 Materials Laboratory | 05/11/2022 | Shawn Lynn | No | 5801-JMFR 430604 Pass | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2022-04-27-9-1 AASHTO T308-10
DIME Test ID: 2022-04-27-9-2 AASHTO T209-12
DIME Test ID: 2022-04-27-9-3 AASHTO T269-14
DIME Test ID: 2022-04-27-9-4 AASHTO T275-07r12
DIME Test ID: 2022-04-27-9-5 AASHTO T283-14