DIME - Sample Record for DIME Sample ID 2022-02-01-46

DIME » All Projects » Project - DEA: 030H08U4 » Sample 2022-02-01-46 » Sample Details

Sample Record

Owner Lab

CT D03 - Olivehurst Northern Regional Laboratory

DIME Sample ID 2022-02-01-46

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214469 DEA: 030H08U4 EFIS: 0319000029
DIST-CO-RTE-PM	03-SAC-50-L0.2/R6.1
Award Date	06/30/2020
Closeout Date	Not set
Work Description	Sac 50 Design Build PLEASE NOTE THAT DESIGN BUILDER MUST PERFORM QUALITY VALIDATION TESTING IN ACCORDANCE WITH THE MATERIAL CONTROL SCHEDULE (MCS) FOR ITEMS SUCH AS STRANDS, HS BOLTS, ELASTOMERIC BEARING PADS, JOINT SEALANTS, COUPLERS & WELDED HOOPS, ETC
Location Description	FROM 0.1 MILE EAST OF I-5 TO 0.8 MILE EAST OF WATT AVE
QA Service Level	1 (Verified on 10/23/2019)

Sample Information

Sample Taken Date	02/01/2022	Sample Unique Key	46
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	02/04/2022
Sample type	Verification	A brief description of the sample	1/2' Virgin Agg
The quantity of what the sample constitutes	JMF 3 bags cold feed	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Teichert	Last name of sampler or witnessed by	Personnel
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Teichert Construction Woodland	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-34-0045
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Teichert Construction Woodland
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

JMF Information

Verification ID	JMF3513-2022-4	Date Created	03/25/2022
JMF Submittal ID	JMF3511-23-2022-5	JMF Status	Submittal Authorized For Use
Producer Mix ID	GC202122-SP	Authorized Date	03/02/2022

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2022-02-01-46-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Thomas Vang, CT D03 - Olivehurst Northern Regional Laboratory	02/08/2022	Terrence White	Yes	04/08/2022	JMF22-003
2022-02-01-46-2	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Thomas Vang, CT D03 - Olivehurst Northern Regional Laboratory	02/11/2022	Terrence White	Yes	04/08/2022	JMF22-003
2022-02-01-46-3	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Thomas Vang, CT D03 - Olivehurst Northern Regional Laboratory	02/10/2022	Terrence White	Yes	04/08/2022	JMF22-003. We do not have the testers answers, only the avg. put into our 35-13 so the avg. is used for all Dime entry spots.
2022-02-01-46-4	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Thomas Vang, CT D03 - Olivehurst Northern Regional Laboratory	02/14/2022	Terrence White	Yes	04/08/2022	JMF22-003
2022-02-01-46-5	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Thomas Vang, CT D03 - Olivehurst Northern Regional Laboratory	02/15/2022	Terrence White	Yes	04/08/2022	JMF22-003
2022-02-01-46-6	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Thomas Vang, CT D03 - Olivehurst Northern Regional Laboratory	02/15/2022	Terrence White	Yes	04/08/2022	JMF22-003
2022-02-01-46-7	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Thomas Vang, CT D03 - Olivehurst Northern Regional Laboratory	02/11/2022	Terrence White	Yes	04/08/2022	JMF22-003
2022-02-01-46-8	CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)	Julian , CT D03 - Olivehurst Northern Regional Laboratory	02/02/2022	Terrence White	Yes	04/08/2022	Per our MREA the aggregate is to clean and there is no plastic in the material. JMF22-003
2022-02-01-46-9	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Thomas Vang, CT D03 - Olivehurst Northern Regional Laboratory	02/10/2022	Terrence White	Yes	04/08/2022	JMF22-003

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2022-02-01-46-1 AASHTO T27-14 (Verified)
DIME Test ID: 2022-02-01-46-2 AASHTO T96-02r10 (Verified)
DIME Test ID: 2022-02-01-46-3 AASHTO T176-08 (Verified)
DIME Test ID: 2022-02-01-46-4 AASHTO T84-14 (Verified)
DIME Test ID: 2022-02-01-46-5 AASHTO T85-13 (Verified)
DIME Test ID: 2022-02-01-46-6 AASHTO T304-11 (Verified)
DIME Test ID: 2022-02-01-46-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2022-02-01-46-8 CTM 204-June 2010 (Verified)
DIME Test ID: 2022-02-01-46-9 ASTM D4791-10 (Verified)