Owner Lab
- CT D02 - North Region Materials Lab
DIME Sample ID 2022-03-17-36
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 66667 DEA: JMFPP EFIS: 0019000043 |
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for submitting Sample information for JMF Prequalification Program. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 03/17/2022 |
Sample Unique Key | 36 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 03/21/2022 |
Sample type | Verification |
A brief description of the sample | 16 boxes of Treated 3/4-inch Type A HMA (eq. PG 64-28 M) with 24 RAP and virgin PG 58-34 M (Valero – Benicia) |
The quantity of what the sample constitutes | JMF Verification |
From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Clint |
Last name of sampler or witnessed by | Roger |
Title of sampler | TET |
Telephone number of sampler | |
Laboratory sample identification | D79007 |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Tullis - Northstate Asphalt - Redding, CA |
Transportation Laboratory (TL) Number | 708108 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | Hot Mix Asphalt |
HMA Type | Type A HMA |
HMA Grading | 3/4 inch |
Lot number | |
Sublot number | |
JMF Verification ID | JMF3513-2022-2 |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2022-03-17-36-1 | AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity) | Colt Sweeny | CT D02 - North Region Materials Lab | 03/21/2022 | Darrell Valasek | Yes | 05/24/2022 | | |
2022-03-17-36-2 | AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content) | Karen Dorado | CT D02 - North Region Materials Lab | 04/06/2022 | Darrell Valasek | Yes | 05/24/2022 | | |
2022-03-17-36-4 | AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity) | Darrell Valasek | CT D02 - North Region Materials Lab | 03/21/2022 | Darrell Valasek | Yes | 05/24/2022 | | |
2022-03-17-36-5 | AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void) | Darrell Valasek | CT D02 - North Region Materials Lab | 03/22/2022 | Darrell Valasek | Yes | 05/24/2022 | VMA = 13.7,
VFA = 73.0,
DP = 1.1 | |
2022-03-17-36-6 | AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content) | Darrell Valasek | CT D02 - North Region Materials Lab | 03/30/2022 | Darrell Valasek | Yes | 05/24/2022 | | |
2022-03-17-36-7 | AASHTO T312-14: Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor (Method of Compaction) | Darrell Valasek | CT D02 - North Region Materials Lab | 03/21/2022 | Darrell Valasek | Yes | 05/24/2022 | | |
2022-03-17-36-8 | CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt | Karen | CT D02 - North Region Materials Lab | 03/27/2022 | Ward Jenkins | Yes | 05/24/2022 | CT 360: Surface Abrasion Loss of 0.1 g/cm² | |
156176156177156181156182156214156435162488