Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2022-03-29-2

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 993131
DEA: 010A1104
EFIS: 0112000211
DIST-CO-RTE-PM01-HUM-101-27.7
Award Date09/21/2021
Closeout DateNot set
Work DescriptionBRIDGE SEISMIC RETROFIT AND ROCK SLOPE PROTECTION.
Location DescriptionHUMBOLDT COUNTY NEAR MYERS FLAT AT SOUTH FORK EEL RIVER BRIDGE
QA Service Level1 (Verified on 07/22/2021)

Sample Information

Sample Taken Date03/29/2022 Sample Unique Key2
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/06/2022
Sample typeQuality Control A brief description of the sample1-1/8x5-1/2 A325 Bolts
The quantity of what the sample constitutes135 From where was the sample collectedDistributor
First name of sampler or witnessed byOscar Last name of sampler or witnessed byVizcaino
Title of sampler Telephone number of sampler6787558969
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameSt Louis Screw and Bolt Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)TT0151870
Heat Number(s)10663770 Nut Mfg. Lot Number(s)32858-201231
Washer Mfg. Lot Number(s)1221-158 Bolt SpecificationASTM A325-1
Bolt Length(s)5.5" Nut SpecificationA-563-DH
Washer Specificationf_436-1 FinishASTM B695 - Mech Galv
Diameter/Size1-1/8" Bolt Mfg. Lot NumberM5388
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2022-03-29-2-1ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)spaineCT HQ - Sacramento Structural Materials Testing Laboratory04/21/2022spaine
Yes
04/28/2022A325 Wedge Tensile
2022-03-29-2-2ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)spaineCT HQ - Sacramento Structural Materials Testing Laboratory04/21/2022spaine
Yes
04/28/2022Nut Proof Load
2022-03-29-2-3ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven PaineCT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022Steven Paine
Yes
04/28/2022
2022-03-29-2-4ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven PaineCT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022Steven Paine
Yes
04/28/2022
2022-03-29-2-5ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven PaineCT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022Steven Paine
Yes
04/28/2022
2022-03-29-2-6ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven PaineCT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022Steven Paine
Yes
04/28/2022
2022-03-29-2-7ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven PaineCT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022Steven Paine
Yes
04/28/2022
2022-03-29-2-8ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven PaineCT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022Steven Paine
Yes
04/28/2022
2022-03-29-2-9ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Steven PaineCT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022Steven Paine
Yes
04/28/2022
2022-03-29-2-10ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Steven PaineCT HQ - Sacramento Structural Materials Testing Laboratory04/22/2022Steven Paine
Yes
04/28/2022

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2022-03-29-2-1 ASTM F606-21 (Verified)
DIME Test ID: 2022-03-29-2-2 ASTM F606-21 (Verified)
DIME Test ID: 2022-03-29-2-3 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-03-29-2-4 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-03-29-2-5 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-03-29-2-6 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-03-29-2-7 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-03-29-2-8 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-03-29-2-9 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-29-2-10 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-29-2-11 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-29-2-12 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-29-2-13 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-29-2-14 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-29-2-15 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-29-2-16 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-29-2-17 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-29-2-18 ASTM E18-20 (Verified)
DIME Test ID: 2022-03-29-2-19 ASTM E18-20 (Verified)