Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2022-03-22-2
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 214099
DEA: 024F5904
EFIS: 0213000010 |
|---|
| DIST-CO-RTE-PM | 02-TEH-5-R25.4 |
|---|
| Award Date | 07/08/2020 |
|---|
| Closeout Date | Not set |
|---|
| Work Description | BRIDGE SEISMIC RETROFIT AND SCOUR REPAIR. |
|---|
| Location Description | TEHAMA COUNTY IN RED BLUFF AT SACRAMENTO RIVER BRIDGE |
|---|
| QA Service Level | 1 (Verified on 05/07/2019) |
|---|
Sample Information
| Sample Taken Date | 03/22/2022 |
Sample Unique Key | 2 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 03/30/2022 |
|---|
| Sample type | Quality Assurance |
A brief description of the sample | A449 rod, A563 nuts (2) and F436 type 1 washer |
|---|
| The quantity of what the sample constitutes | 21 7/8" x 6 3/4" A449 threaded rods with 2 nuts and 2 washers each |
From where was the sample collected | Fabricator |
|---|
| First name of sampler or witnessed by | Greg |
Last name of sampler or witnessed by | Thompson |
|---|
| Title of sampler | Associate Steel Inspector |
Telephone number of sampler | 510-376-7155 |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | 2022-3-22-1 |
|---|
| The fabricator/manufacturer/facility name | C&K Johnson |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B9-037-22 |
Structure unique identifier | 08-0095 R/L |
|---|
| Structure name | Sacramento River Bridge- I5 |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | none |
|---|
| Heat Number(s) | 10707140 rods
35213 Nuts
0721-890 washers |
Nut Mfg. Lot Number(s) | 35213-202028 |
|---|
| Washer Mfg. Lot Number(s) | Technical Stamping 0721-890 |
Bolt Specification | A449 |
|---|
| Bolt Length(s) | 6 3/4" |
Nut Specification | A563 gr DH |
|---|
| Washer Specification | F436 type 1 |
Finish | HDGalv |
|---|
| Diameter/Size | 7/8" |
Bolt Mfg. Lot Number | Vulcan 10707140 |
|---|
| Rocap Test Requirement(s) | no |
Lubricant Requirements(s) | yes |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2022-03-22-2-1 | ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/18/2022 | spaine | Yes | 04/21/2022 | A449 Tensile |
|
| 2022-03-22-2-2 | ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/19/2022 | spaine | Yes | 04/21/2022 | Nut Proof Load |
|
| 2022-03-22-2-3 | ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/20/2022 | Steven Paine | Yes | 04/21/2022 | |
|
| 2022-03-22-2-4 | ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/20/2022 | Steven Paine | Yes | 04/21/2022 | |
|
| 2022-03-22-2-5 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/20/2022 | Steven Paine | Yes | 04/21/2022 | |
|
| 2022-03-22-2-6 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/20/2022 | Steven Paine | Yes | 04/21/2022 | |
|
| 2022-03-22-2-7 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/20/2022 | Steven Paine | Yes | 04/21/2022 | |
|
| 2022-03-22-2-8 | ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/20/2022 | Steven Paine | Yes | 04/21/2022 | |
|
157440157633157912157913157914157915157916157917
