Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2022-03-22-1

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214099
DEA: 024F5904
EFIS: 0213000010
DIST-CO-RTE-PM02-TEH-5-R25.4
Award Date07/08/2020
Closeout Date08/14/2023
Work DescriptionBRIDGE SEISMIC RETROFIT AND SCOUR REPAIR.
Location DescriptionTEHAMA COUNTY IN RED BLUFF AT SACRAMENTO RIVER BRIDGE
QA Service Level1 (Verified on 05/07/2019)

Sample Information

Sample Taken Date03/22/2022 Sample Unique Key1
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/30/2022
Sample typeQuality Assurance A brief description of the sampleF1554 rod, A563 nuts (2) and F436 type 1 washer
The quantity of what the sample constitutes57 7/8" x 5 1/2" A449 threaded rods with 2 nuts and 2 washers each From where was the sample collectedFabricator
First name of sampler or witnessed byGreg Last name of sampler or witnessed byThompson
Title of samplerAssociate Steel Inspector Telephone number of sampler510-376-7155
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameC&K Johnson Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormB9-036-22 Structure unique identifier08-0095 R/L
Structure nameSacramento River Bridge- I5

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)none
Heat Number(s)10707140 rods 35213 Nuts 0721-890 washers Nut Mfg. Lot Number(s)35213-202028
Washer Mfg. Lot Number(s)Technical Stamping 0721-890 Bolt SpecificationA449
Bolt Length(s)5 1/2" Nut SpecificationA563 gr DH
Washer SpecificationF436 type 1 FinishHDGalv
Diameter/Size7/8" Bolt Mfg. Lot NumberVulcan 10707140
Rocap Test Requirement(s)no Lubricant Requirements(s)yes

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2022-03-22-1-1ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory04/18/2022spaine
Yes
04/21/2022A449 Tensile
2022-03-22-1-2ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory04/19/2022spaine
Yes
04/21/2022
2022-03-22-1-3ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/20/2022Steven Paine
Yes
04/21/2022
2022-03-22-1-4ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/20/2022Steven Paine
Yes
04/21/2022
2022-03-22-1-5ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/20/2022Steven Paine
Yes
04/21/2022
2022-03-22-1-6ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/20/2022Steven Paine
Yes
04/21/2022
2022-03-22-1-7ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/20/2022Steven Paine
Yes
04/21/2022
2022-03-22-1-8ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/20/2022Steven Paine
Yes
04/21/2022
2022-03-22-1-9ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/20/2022Steven Paine
Yes
04/21/2022
2022-03-22-1-10ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory04/20/2022Steven Paine
Yes
04/21/2022

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2022-03-22-1-1 ASTM F606-21 (Verified)
DIME Test ID: 2022-03-22-1-2 ASTM F606-21 (Verified)
DIME Test ID: 2022-03-22-1-3 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-03-22-1-4 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-03-22-1-5 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-03-22-1-6 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-03-22-1-7 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-03-22-1-8 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-03-22-1-9 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-22-1-10 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-22-1-11 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-22-1-12 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-22-1-13 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-22-1-14 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-22-1-15 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-22-1-16 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-22-1-17 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-03-22-1-18 ASTM E18-20 (Verified)
DIME Test ID: 2022-03-22-1-19 ASTM E18-20 (Verified)