DIME » All Projects » Project - DEA: 031H2704 » Sample 2022-01-21-44 » Sample Details

Sample Record

Owner Lab

  • CT D03 - Olivehurst Northern Regional Laboratory

DIME Sample ID 2022-01-21-44

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 993183
DEA: 031H2704
EFIS: 0316000082
DIST-CO-RTE-PM03-YUB-70-R11.2/13.5
Award Date10/14/2021
Closeout DateNot set
Work DescriptionUPGRADE BRIDGE RAILS & CONSTRUCT CONCRETE MEDIAN BARRIER.
Location DescriptionYUBA COUNTY NEAR LINDA AND MARYSVILLE FROM 2.4 MILES SOUTH OF FEATHER RIVER BOULEVARD UNDERCROSSING TO THE YUBA RIVER BRIDGE AND OVERHEAD
QA Service Level1 (Verified on 08/16/2021)

Sample Information

Sample Taken Date01/21/2022 Sample Unique Key44
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing02/10/2022
Sample typeVerification A brief description of the sample1/2" virgin aggrgate
The quantity of what the sample constitutes3 Bags of aggregate From where was the sample collectedSource
First name of sampler or witnessed byZack Last name of sampler or witnessed byMason
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameKRC HALLWOOD Drum Plant Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-58-0002
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedCold Feed
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size1/2 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

JMF Information

Verification IDJMF3513-2022-3 Date Created03/22/2022
JMF Submittal IDJMF3511-23-2022-4 JMF StatusSubmittal Authorized For Use
Producer Mix IDHR-22751000 Authorized Date02/18/2022

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2022-01-21-44-1AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Tom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory02/14/2022Julian Gonzales
Yes
03/22/2022JMF 22-001
2022-01-21-44-2CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Julian Gonzales, CT D03 - Olivehurst Northern Regional Laboratory02/14/2022Julian Gonzales
Yes
03/22/2022Per our MREA of the district 3 materials lab, the aggregate is to clean and does not contain any plastic. JMF 22-001
2022-01-21-44-3ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Tom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory02/14/2022Julian Gonzales
Yes
03/22/2022Jmf 22-001
2022-01-21-44-4AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Julian Gonzales, CT D03 - Olivehurst Northern Regional Laboratory02/15/2022Julian Gonzales
Yes
03/22/2022JMF 22-001
2022-01-21-44-5AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Julian Gonzales, CT D03 - Olivehurst Northern Regional Laboratory02/15/2022Julian Gonzales
Yes
03/22/2022JMF 22-001
2022-01-21-44-6AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Julian Gonzales, CT D03 - Olivehurst Northern Regional Laboratory02/14/2022Julian Gonzales
Yes
03/22/2022Not given the numbers only the avg. so the avg. is used as all 3 test numbers in Dime. JMF 22-001
2022-01-21-44-7AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Thomas Vang, CT D03 - Olivehurst Northern Regional Laboratory02/16/2022Julian Gonzales
Yes
03/22/2022JMF 22-001
2022-01-21-44-8AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Julian Gonzales, CT D03 - Olivehurst Northern Regional Laboratory02/15/2022Julian Gonzales
Yes
03/22/2022JMF 22-001
2022-01-21-44-9AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Thomas Vang, CT D03 - Olivehurst Northern Regional Laboratory02/11/2022Julian Gonzales
Yes
03/22/2022JMF 22-001

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2022-01-21-44-1 AASHTO T335-09r13 (Verified)
DIME Test ID: 2022-01-21-44-2 CTM 204-June 2010 (Verified)
DIME Test ID: 2022-01-21-44-3 ASTM D4791-10 (Verified)
DIME Test ID: 2022-01-21-44-4 AASHTO T304-11 (Verified)
DIME Test ID: 2022-01-21-44-5 AASHTO T84-14 (Verified)
DIME Test ID: 2022-01-21-44-6 AASHTO T176-08 (Verified)
DIME Test ID: 2022-01-21-44-7 AASHTO T96-02r10 (Verified)
DIME Test ID: 2022-01-21-44-8 AASHTO T85-13 (Verified)
DIME Test ID: 2022-01-21-44-9 AASHTO T27-14 (Verified)