DIME » All Projects » Project - DEA: 112T2174 » Sample 2022-03-11-13 » Sample Details

Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2022-03-11-13

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 211848
DEA: 112T2174
EFIS: 1116000131
DIST-CO-RTE-PM11-SD-5-R37.4 - R46.5
Award Date12/22/2016
Closeout DateNot set
Work Description(Alternative Delivery) CMGC, San Elijo Highway Bridge Replacement. Replace the San Elijo lagoon highway bridge, construct HOV lanes, construct bike and pedestrian trails and bridge, build multi-use facility at Manchester Ave.
Location DescriptionIN SAN DIEGO COUNTY IN SOLANA BEACH AND ENCINITAS FROM 0.1 MILE NORTH OF LOMAS SANTA FE DRIVE OVERCROSSING TO 0.2 MILE SOUTH OF BIRMINGHAM DRIVE OVERCROSSING
QA Service Level1 (Verified on 01/31/2017)

Sample Information

Sample Taken Date03/11/2022 Sample Unique Key13
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/11/2022
Sample typeQuality Assurance A brief description of the sample1/2" HMA-A
The quantity of what the sample constitutes4 bags, 12 boxes, 3 cans From where was the sample collectedFabricator
First name of sampler or witnessed byCristopher Last name of sampler or witnessed byLawless
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameCCA Lakeside Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot number
Sublot number HMA Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2022-03-11-13-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Shawn Lynn, CT D11 - District 11 Materials Laboratory03/16/2022Shawn Lynn
Yes
08/29/20241309-JMF 2T2174 22 03 11 13
2022-03-11-13-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Shawn Lynn, CT D11 - District 11 Materials Laboratory03/17/2022Shawn Lynn
Yes
08/29/20241309-JMF 2T2174
2022-03-11-13-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Shawn Lynn, CT D11 - District 11 Materials Laboratory03/17/2022Shawn Lynn
Yes
08/29/20241309-PSU 2T2174
2022-03-11-13-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Shawn Lynn, CT D11 - District 11 Materials Laboratory03/17/2022Shawn Lynn
Yes
08/29/20241309-JMF 2T2174
2022-03-11-13-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Shawn Lynn, CT D11 - District 11 Materials Laboratory03/18/2022Shawn Lynn
Yes
08/29/20241309-JMF 2T2174
2022-03-11-13-7AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Shawn Lynn, CT D11 - District 11 Materials Laboratory03/16/2022Shawn Lynn
Yes
08/29/2024Ignition Oven Burn for RAP

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2022-03-11-13-1 AASHTO T308-10 (Verified)
DIME Test ID: 2022-03-11-13-2 AASHTO T209-12 (Verified)
DIME Test ID: 2022-03-11-13-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2022-03-11-13-4 AASHTO T269-14 (Verified)
DIME Test ID: 2022-03-11-13-5 AASHTO T283-14 (Verified)
DIME Test ID: 2022-03-11-13-7 AASHTO T308-10 (Verified)