Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2022-02-16-19
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 02/16/2022 |
Sample Unique Key | 19 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 02/22/2022 |
Sample type | Quality Assurance |
A brief description of the sample | A325 Bolts |
The quantity of what the sample constitutes | 537 |
From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Mike |
Last name of sampler or witnessed by | Hasler |
Title of sampler | |
Telephone number of sampler | |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Fontana Fasteners |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
Heat Number(s) | CR10569300-82P |
Nut Mfg. Lot Number(s) | |
Washer Mfg. Lot Number(s) | |
Bolt Specification | A325 |
Bolt Length(s) | 3" |
Nut Specification | na |
Washer Specification | na |
Finish | HDG |
Diameter/Size | 1.25" |
Bolt Mfg. Lot Number | 816633 |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2022-02-16-19-1 | ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/25/2022 | Steven Paine | Yes | 02/25/2022 | | |
2022-02-16-19-2 | ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/25/2022 | Steven Paine | Yes | 02/25/2022 | | |
2022-02-16-19-3 | ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/25/2022 | Steven Paine | Yes | 02/25/2022 | | |
2022-02-16-19-4 | ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/25/2022 | Steven Paine | Yes | 02/25/2022 | | |
2022-02-16-19-5 | ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/25/2022 | Steven Paine | Yes | 02/25/2022 | | |
2022-02-16-19-6 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/25/2022 | Steven Paine | Yes | 02/25/2022 | | |
2022-02-16-19-7 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/25/2022 | Steven Paine | Yes | 02/25/2022 | | |
2022-02-16-19-8 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/25/2022 | Steven Paine | Yes | 02/25/2022 | | |
2022-02-16-19-9 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/25/2022 | Steven Paine | Yes | 02/25/2022 | | |
2022-02-16-19-10 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/25/2022 | Steven Paine | Yes | 02/25/2022 | | |
151731151732151733151734151735151736151737151738151739151740
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
No results found. |
Test File Attachments
DIME Test ID: 2022-02-16-19-1 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-02-16-19-2 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-02-16-19-3 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-02-16-19-4 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-02-16-19-5 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-02-16-19-6 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-02-16-19-7 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-02-16-19-8 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-02-16-19-9 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-02-16-19-10 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-02-16-19-11 ASTM E18-20 (Verified)
DIME Test ID: 2022-02-16-19-12 ASTM E18-20 (Verified)
DIME Test ID: 2022-02-16-19-13 ASTM E18-20 (Verified)