Sample Record
Owner Lab
- CT D11 - District 11 Materials Laboratory
DIME Sample ID 2022-01-31-9
Project Information
Project Identifiers | Project ID: 993287 DEA: 112T35U4 EFIS: 1121000195 |
---|---|
DIST-CO-RTE-PM | 11-SD-5-R37.4/R52.6 |
Award Date | Not set |
Closeout Date | Not set |
Work Description | CMSTPL-6211(148) I-5 N Coast Corridor HOV Extension Carlsbad |
Location Description | IN SAN DIEGO COUNTY AT VARIOUS LOCATIONS FROM LOMAS SANTA FE DRIVE UNDERCROSSING TO 0.2 MILES NORTH OF OCEANSIDE BOULEVARD UNDERCROSSING |
QA Service Level | 1 (Verified on 09/23/2021) |
Sample Information
Sample Taken Date | 01/31/2022 | Sample Unique Key | 9 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/01/2022 |
Sample type | Quality Assurance | A brief description of the sample | 1/2" HMA-A |
The quantity of what the sample constitutes | 12 boxes, 3 bags, 2 cans | From where was the sample collected | Source |
First name of sampler or witnessed by | MARCO | Last name of sampler or witnessed by | ESTUDILLO |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Vulcan Otay | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-37-0035::CHULA VISTA |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | At the plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2022-01-31-9-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Daniel Smith, CT D11 - District 11 Materials Laboratory | 02/03/2022 | Daniel Smith | No | FAILED | Info | |
2022-01-31-9-2 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Daniel Smith, CT D11 - District 11 Materials Laboratory | 02/03/2022 | Daniel Smith | No | PASSED | Info | |
2022-01-31-9-3 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Daniel Smith, CT D11 - District 11 Materials Laboratory | 02/03/2022 | Daniel Smith | No | PASSED 93% | Info | |
2022-01-31-9-4 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Daniel Smith, CT D11 - District 11 Materials Laboratory | 02/03/2022 | Daniel Smith | No | PASSED | Info | |
2022-01-31-9-5 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Daniel Smith, CT D11 - District 11 Materials Laboratory | 02/03/2022 | Daniel Smith | No | PASSED | Info | |
2022-01-31-9-7 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 02/02/2022 | Mohammad Abbassi | No | Info | ||
2022-01-31-9-8 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Daniel Smith, CT D11 - District 11 Materials Laboratory | 02/03/2022 | Daniel Smith | No | Info | ||
2022-01-31-9-9 | AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 02/03/2022 | Mohammad Abbassi | No | PASSED | Info | |
2022-01-31-9-10 | AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity) | Daniel Smith, CT D11 - District 11 Materials Laboratory | 02/03/2022 | Daniel Smith | No | RAP | Info | |
2022-01-31-9-11 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Melchor Oronoz, CT D11 - District 11 Materials Laboratory | 02/03/2022 | Melchor Oronoz | No | Pass | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2022-01-31-9-1 AASHTO T27-14
DIME Test ID: 2022-01-31-9-2 AASHTO T335-09r13
DIME Test ID: 2022-01-31-9-3 ASTM D4791-10
DIME Test ID: 2022-01-31-9-4 AASHTO T176-08
DIME Test ID: 2022-01-31-9-5 AASHTO T84-14
DIME Test ID: 2022-01-31-9-7 AASHTO T96-02r10
DIME Test ID: 2022-01-31-9-8 AASHTO T304-11
DIME Test ID: 2022-01-31-9-9 AASHTO T30-19
DIME Test ID: 2022-01-31-9-10 AASHTO T209-12
DIME Test ID: 2022-01-31-9-11 AASHTO T85-13