Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2022-01-03-1
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 215255 DEA: 040A7714 EFIS: 0420000287 |
DIST-CO-RTE-PM | 04-ALA-80-6.4-6.6 |
Award Date | 05/03/2021 |
Closeout Date | Not set |
Work Description | CONSTRUCT PEDESTRIAN OVERCROSSING BRIDGE AND RETAINING WALLS. GILMAN INTERCHANGE IMPROVEMENTS |
Location Description | ALAMEDA COUNTY IN BERKELEY FROM 0.6 MILE NORTH OF UNIVERSITY AVENUE OVERCROSSING TO 0.1 MILE SOUTH OF GILMAN STREET UNDERCROSSING |
QA Service Level | 1 (Verified on 12/07/2020) |
Sample Information
Sample Taken Date | 01/03/2022 |
Sample Unique Key | 1 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 01/07/2022 |
Sample type | Quality Assurance |
A brief description of the sample | 1-1/2" x 80" HDG ASTM A354 Gr BC Threaded Rod |
The quantity of what the sample constitutes | 64 |
From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Charles |
Last name of sampler or witnessed by | Franco |
Title of sampler | QA Inspector |
Telephone number of sampler | 858-583-9270 |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Portland Bolt - Oregon |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
Heat Number(s) | 20743200 |
Nut Mfg. Lot Number(s) | DECR |
Washer Mfg. Lot Number(s) | 163305 |
Bolt Specification | ASTM A354 GR BC |
Bolt Length(s) | 80" |
Nut Specification | A563-DH |
Washer Specification | F436-1 |
Finish | HDG |
Diameter/Size | 1-1/2" |
Bolt Mfg. Lot Number | 30637 |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2022-01-03-1-1 | ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/10/2022 | spaine | Yes | 01/20/2022 | Nut Proof Load | |
2022-01-03-1-2 | ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/13/2022 | spaine | Yes | 01/20/2022 | | |
2022-01-03-1-3 | ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/13/2022 | spaine | Yes | 01/20/2022 | | |
2022-01-03-1-4 | ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/13/2022 | Steven Paine | Yes | 01/20/2022 | | |
2022-01-03-1-5 | ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/13/2022 | Steven Paine | Yes | 01/20/2022 | | |
2022-01-03-1-6 | ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/13/2022 | Steven Paine | Yes | 01/20/2022 | | |
2022-01-03-1-7 | ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/13/2022 | Steven Paine | Yes | 01/20/2022 | | |
2022-01-03-1-8 | ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/13/2022 | Steven Paine | Yes | 01/20/2022 | | |
2022-01-03-1-9 | ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/13/2022 | Steven Paine | Yes | 01/20/2022 | | |
2022-01-03-1-10 | ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/13/2022 | Steven Paine | Yes | 01/20/2022 | | |
145448145885145888146021146022146023146024146025146026146027