DIME - Sample Record for DIME Sample ID 2021-12-21-7

DIME » All Projects » Project - DEA: 112T2184 » Sample 2021-12-21-7 » Sample Details

Sample Record

Owner Lab

CT D11 - District 11 Materials Laboratory

DIME Sample ID 2021-12-21-7

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 213811 DEA: 112T2184 EFIS: 1116000174
DIST-CO-RTE-PM	11-SD-5-R38.4/R47.3
Award Date	10/29/2018
Closeout Date	01/03/2024
Work Description	(Alternative Delivery) Construct HOV lanes, soundwalls, culvert rehab, ITS, and bike trail on I-5 . NCC I-5 Highway Improvement.
Location Description	IN SAN DIEGO COUNTY IN ENCINITAS AND CARLSBAD FROM SAN ELIJO LAGOON BRIDGE TO 0.3 MILE NORTH OF PALOMAR AIRPORT ROAD OVERCROSSING.
QA Service Level	1 (Verified on 12/19/2018)

Sample Information

Sample Taken Date	12/21/2021	Sample Unique Key	7
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	12/22/2021
Sample type	Quality Assurance	A brief description of the sample	1/2" RWMA
The quantity of what the sample constitutes	2 bags, 12 boxes, 3 cans	From where was the sample collected	Supplier
First name of sampler or witnessed by	Johan	Last name of sampler or witnessed by	Cruz
Title of sampler		Telephone number of sampler	6192792829
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Vulcan Otay	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	not provided
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	At the plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2021-12-21-7-1	AASHTO T11-5: Standard Method of Test for Materials Finer Than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing	Daniel Smith, CT D11 - District 11 Materials Laboratory	12/24/2021	Daniel Smith	Yes	01/06/2022
2021-12-21-7-2	THIS TEST HAS BEEN SUPERSEDED. AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Daniel Smith, CT D11 - District 11 Materials Laboratory	12/24/2021	Daniel Smith	Yes	01/06/2022	THIS TEST HAS BEEN SUPERSEDED.
2021-12-21-7-3	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Daniel Smith, CT D11 - District 11 Materials Laboratory	12/24/2021	Daniel Smith	Yes	01/06/2022
2021-12-21-7-4	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Daniel Smith, CT D11 - District 11 Materials Laboratory	12/24/2021	Daniel Smith	Yes	01/06/2022
2021-12-21-7-5	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Daniel Smith, CT D11 - District 11 Materials Laboratory	12/24/2021	Daniel Smith	Yes	01/06/2022
2021-12-21-7-6	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Daniel Smith/Mohammad Abbassi, CT D11 - District 11 Materials Laboratory	12/24/2021	Daniel Smith	Yes	01/06/2022
2021-12-21-7-7	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	DP Smith, CT D11 - District 11 Materials Laboratory	12/24/2021	Daniel Smith	Yes	01/06/2022
2021-12-21-7-8	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Daniel Smith, CT D11 - District 11 Materials Laboratory	12/24/2021	Daniel Smith	Yes	01/06/2022
2021-12-21-7-9	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Mohammed Abbassi, CT D11 - District 11 Materials Laboratory	12/24/2021	Daniel Smith	Yes	01/06/2022
2021-12-21-7-10	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Mohammad Abbassi, CT D11 - District 11 Materials Laboratory	12/29/2021	Mohammad Abbassi	Yes	01/06/2022

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-12-21-7-1 AASHTO T11-5 (Verified)
DIME Test ID: 2021-12-21-7-2 AASHTO T27-14 (Verified)
DIME Test ID: 2021-12-21-7-3 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-12-21-7-4 ASTM D4791-10 (Verified)
DIME Test ID: 2021-12-21-7-5 AASHTO T176-08 (Verified)
DIME Test ID: 2021-12-21-7-6 AASHTO T84-14 (Verified)
DIME Test ID: 2021-12-21-7-7 AASHTO T85-13 (Verified)
DIME Test ID: 2021-12-21-7-8 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-12-21-7-9 AASHTO T304-11 (Verified)
DIME Test ID: 2021-12-21-7-10 AASHTO T27-14 (Verified)
DIME Test ID: 2021-12-21-7-11 AASHTO T27-14