Sample Record

Owner Lab

  • CT D02 - North Region Materials Lab

DIME Sample ID 2020-10-08-52

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214190
DEA: 024G41U4
EFIS: 0218000047
DIST-CO-RTE-PM02-SIS,SIS-5-Var
Award Date08/26/2019
Closeout Date11/24/2021
Work DescriptionREPLACE REINFORCED CONCRETE BRIDGES & CONSTRUCT RETAINING WALL.
Location DescriptionSHASTA AND SISKIYOU COUNTIES ABOUT 7 MILES NORTH OF POLLARD FLAT FROM 0.8 MILE SOUTH TO 0.7 MILE NORTH OF SIMS ROAD UNDERCROSSING AND FROM 0.6 MILE SOUTH OF CASTLE CRAGS DRIVE UNDERCROSSING TO 0.2 MILE SOUTH OF SOUTH DUNSMUIR UNDERCROSSING
QA Service Level1 (Verified on 07/09/2019)

Sample Information

Sample Taken Date10/08/2020 Sample Unique Key52
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing10/08/2020
Sample typeVerification A brief description of the sampleLime Treated 3/4-inch Type A HMA (eq. PG 64-28 M) with 23.6% RAP and virgin PG 58-34 M binder from Valero - Benicia
The quantity of what the sample constitutesJMF 18-03-R05m From where was the sample collectedManufacturer
First name of sampler or witnessed byRandy Last name of sampler or witnessed byBibbins
Title of sampler Telephone number of sampler
Laboratory sample identificationD78659 Linked DIME Sample ID
The fabricator/manufacturer/facility nameJF Shea Construction - Fawndale Rock and Asphalt - Redding, CA Transportation Laboratory (TL) Number779351
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number JMF Verification ID JMF3513-2021-84

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-10-08-52-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)Arthur Mills and K. Rios DoradoCT D02 - North Region Materials Lab10/08/2020Ward Jenkins
Yes
12/23/2021
2020-10-08-52-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Darrell ValasekCT D02 - North Region Materials Lab10/08/2020Ward Jenkins
Yes
12/23/2021
2020-10-08-52-3AASHTO T312-14: Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor (Method of Compaction)Darrell ValasekCT D02 - North Region Materials Lab10/08/2020Ward Jenkins
Yes
12/23/2021
2020-10-08-52-4AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Darrell ValasekCT D02 - North Region Materials Lab10/08/2020Ward Jenkins
Yes
12/23/2021
2020-10-08-52-5AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Terry McCormickCT D02 - North Region Materials Lab10/09/2020Ward Jenkins
Yes
12/23/2021VMA = 13.3%, VFA = 70.6%, DP = 1.5
2020-10-08-52-6AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Terry McCormick and D. ValasekCT D02 - North Region Materials Lab10/13/2020Ward Jenkins
Yes
12/23/2021
2020-10-08-52-7AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)Darrell ValasekCT D02 - North Region Materials Lab10/12/2020Ward Jenkins
Yes
12/23/2021