Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2021-11-11-10

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214099
DEA: 024F5904
EFIS: 0213000010
DIST-CO-RTE-PM02-TEH-5-R25.4
Award Date07/08/2020
Closeout Date08/14/2023
Work DescriptionBRIDGE SEISMIC RETROFIT AND SCOUR REPAIR.
Location DescriptionTEHAMA COUNTY IN RED BLUFF AT SACRAMENTO RIVER BRIDGE
QA Service Level1 (Verified on 05/07/2019)

Sample Information

Sample Taken Date11/11/2021 Sample Unique Key10
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing11/18/2021
Sample typeQuality Assurance A brief description of the sampleA325 HDG Rocap Assembiy
The quantity of what the sample constitutes353 From where was the sample collectedFabricator
First name of sampler or witnessed byKevin Last name of sampler or witnessed byCarpenter
Title of samplerQA Telephone number of sampler14156081742
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameFontana Gruppo Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormB24-108-21 Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)L818R1R
Heat Number(s)10649420 Nut Mfg. Lot Number(s)453592B
Washer Mfg. Lot Number(s)10618 Bolt SpecificationA325
Bolt Length(s)2-1/2" Nut SpecificationA563
Washer SpecificationF436 FinishHDG
Diameter/Size7/8" Bolt Mfg. Lot NumberL818R1
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-11-11-10-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory11/23/2021spaine
Yes
12/02/2021Nut Proof Load
2021-11-11-10-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory11/23/2021spaine
Yes
12/02/2021Nut Proof Load
2021-11-11-10-3ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory12/01/2021Steven Paine
Yes
12/02/2021
2021-11-11-10-4ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory12/01/2021Steven Paine
Yes
12/02/2021
2021-11-11-10-5ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory12/01/2021Steven Paine
Yes
12/02/2021
2021-11-11-10-6ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory12/01/2021Steven Paine
Yes
12/02/2021
2021-11-11-10-7ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory12/01/2021Steven Paine
Yes
12/02/2021
2021-11-11-10-8ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory12/01/2021Steven Paine
Yes
12/02/2021
2021-11-11-10-9ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory12/01/2021Steven Paine
Yes
12/02/2021
2021-11-11-10-10ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory12/01/2021Steven Paine
Yes
12/02/2021

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-11-11-10-1 ASTM F606-14a (Verified)
DIME Test ID: 2021-11-11-10-2 ASTM F606-14a (Verified)
DIME Test ID: 2021-11-11-10-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-11-11-10-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-11-11-10-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-11-11-10-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-11-11-10-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-11-11-10-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-11-11-10-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-11-11-10-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-11-11-10-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-11-11-10-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-11-11-10-13 ASTM B499-14 (Verified)
DIME Test ID: 2021-11-11-10-14 ASTM B499-14 (Verified)
DIME Test ID: 2021-11-11-10-15 ASTM B499-14 (Verified)
DIME Test ID: 2021-11-11-10-16 ASTM B499-14 (Verified)
DIME Test ID: 2021-11-11-10-17 ASTM B499-14 (Verified)
DIME Test ID: 2021-11-11-10-18 ASTM B499-14 (Verified)
DIME Test ID: 2021-11-11-10-19 ASTM B499-14 (Verified)
DIME Test ID: 2021-11-11-10-20 ASTM B499-14 (Verified)
DIME Test ID: 2021-11-11-10-21 ASTM B499-14 (Verified)
DIME Test ID: 2021-11-11-10-22 ASTM B499-14 (Verified)
DIME Test ID: 2021-11-11-10-23 ASTM B499-14 (Verified)
DIME Test ID: 2021-11-11-10-24 ASTM B499-14 (Verified)
DIME Test ID: 2021-11-11-10-25 ASTM B499-14 (Verified)
DIME Test ID: 2021-11-11-10-26 ASTM B499-14 (Verified)
DIME Test ID: 2021-11-11-10-27 ASTM B499-14 (Verified)
DIME Test ID: 2021-11-11-10-28 ASTM E18-15 (Verified)
DIME Test ID: 2021-11-11-10-29 ASTM E18-15 (Verified)
DIME Test ID: 2021-11-11-10-30 ASTM E18-15 (Verified)
DIME Test ID: 2021-11-11-10-31 ASTM E18-15 (Verified)
DIME Test ID: 2021-11-11-10-32 ASTM E18-15 (Verified)
DIME Test ID: 2021-11-11-10-33 ASTM E18-15 (Verified)