DIME - Sample Record for DIME Sample ID 2021-11-05-17

DIME » All Projects » Project - DEA: 120N8604 » Sample 2021-11-05-17 » Sample Details

Sample Record

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2021-11-05-17

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214909 DEA: 120N8604 EFIS: 1214000123
DIST-CO-RTE-PM	12-ORA-73-23.7/24.1
Award Date	06/25/2020
Closeout Date	01/09/2023
Work Description	REPLACE STRUCTURAL CONCRETE BRIDGE & RETAINING WALL; & PLACE HMA.
Location Description	ORANGE COUNTY IN NEWPORT BEACH FROM 0.3 MILE NORTH OF BISON AVENUE TO 0.3 MILE SOUTH OF UNIVERSITY DRIVE
QA Service Level	1 (Verified on 07/21/2020)

Sample Information

Sample Taken Date	11/05/2021	Sample Unique Key	17
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	11/10/2021
Sample type	Verification	A brief description of the sample	3/4" WMA-A-SP R25, 0.25% Evotherm
The quantity of what the sample constitutes	2 Bags of Combined Aggregate, 2 Bags of RAP	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	RJ Noble Orange	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0625A-21	Linked DIME Sample ID
The fabricator/manufacturer/facility name	RJ Noble Orange	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0035::EAGLE VALLEY QUARRY
The fabricator's/manufacturer's product name for the sample	3/4 WMA-A-SP R25	The fabricator/manufacturer designation for the sample
The plant number	36R2508SPWEO	A detailed description of where the material sample was collected	Belt Cut at RJ Noble Orange Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2021-11-05-17-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory	11/12/2021	Michael Magana	Yes	11/23/2021	Combined Virgin Aggregate Gradation
2021-11-05-17-2	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Sebastian Ferrer, CT D08 - Fontana Southern Regional Laboratory	11/16/2021	Michael Magana	Yes	11/23/2021
2021-11-05-17-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	11/13/2021	Michael Magana	Yes	11/23/2021
2021-11-05-17-4	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	David Padilla, CT D08 - Fontana Southern Regional Laboratory	11/15/2021	Michael Magana	Yes	11/23/2021
2021-11-05-17-5	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Edmond Jabbour, CT D08 - Fontana Southern Regional Laboratory	11/12/2021	Michael Magana	Yes	11/23/2021
2021-11-05-17-6	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Michael Magana, CT D08 - Fontana Southern Regional Laboratory	11/16/2021	Michael Magana	Yes	11/23/2021
2021-11-05-17-7	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Michael Magana, CT D08 - Fontana Southern Regional Laboratory	11/16/2021	Michael Magana	Yes	11/23/2021
2021-11-05-17-8	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Michael Magana, CT D08 - Fontana Southern Regional Laboratory	11/16/2021	Michael Magana	Yes	11/23/2021
2021-11-05-17-9	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	David Padilla, CT D08 - Fontana Southern Regional Laboratory	11/15/2021	Michael Magana	Yes	11/23/2021	RAP Gradation After Ignition Oven
2021-11-05-17-10	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Friday Ofoegbu, David Padilla, CT D08 - Fontana Southern Regional Laboratory	11/16/2021	Michael Magana	Yes	11/23/2021	Combined RAP/Virgin Aggregate Gradation w/Correlation Factors Applied

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-11-05-17-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-11-05-17-2 AASHTO T84-14 (Verified)
DIME Test ID: 2021-11-05-17-3 AASHTO T85-13 (Verified)
DIME Test ID: 2021-11-05-17-4 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-11-05-17-5 AASHTO T176-08 (Verified)
DIME Test ID: 2021-11-05-17-6 AASHTO T304-11 (Verified)
DIME Test ID: 2021-11-05-17-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-11-05-17-8 ASTM D4791-10 (Verified)
DIME Test ID: 2021-11-05-17-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2021-11-05-17-10 CTM 202-November 2011 (Verified)