Owner Lab
- CT D03 - North Region Materials Lab
DIME Sample ID 2021-07-08-55
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 215656
DEA: 032G0604
EFIS: 0320000192 |
|---|
| DIST-CO-RTE-PM | 03-SAC-5736- |
|---|
| Award Date | 05/26/2021 |
|---|
| Closeout Date | 05/11/2022 |
|---|
| Work Description | REMOVE AND REPLACE CL2 AGGREGATE BASE AND HMA (TYPE A). |
|---|
| Location Description | SACRAMENTO COUNTY IN SACRAMENTO AT THE NORTHGATE MAINTENANCE STATION AT 3940 ROSIN COURT |
|---|
| QA Service Level | 1 (Verified on 04/19/2021) |
|---|
Sample Information
| Sample Taken Date | 07/08/2021 |
Sample Unique Key | 55 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 09/01/2021 |
|---|
| Sample type | Verification |
A brief description of the sample | 1/2" untreated virgin Aggregate |
|---|
| The quantity of what the sample constitutes | 2 bags |
From where was the sample collected | Supplier |
|---|
| First name of sampler or witnessed by | ? |
Last name of sampler or witnessed by | ? |
|---|
| Title of sampler | |
Telephone number of sampler | |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | George Reed Drum Plant |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | 91-58-0001::WESTERN AGGREGATES |
|---|
| The fabricator's/manufacturer's product name for the sample | |
The fabricator/manufacturer designation for the sample | |
|---|
| The plant number | |
A detailed description of where the material sample was collected | Belt Feed |
|---|
| Where the material sample would have been placed if not sampled | |
Primary Aggregate Nominal Size | 1/2 inch |
|---|
| The concrete mix design number | |
Lot number | |
|---|
| Sublot number | |
JMF Verification ID | JMF3513-2021-79 |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2021-07-08-55-1 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Tom Stinnett | CT D03 - North Region Materials Lab | 09/03/2021 | Julian Gonzales | Yes | 09/24/2021 | JMF 21-036 |
|
| 2021-07-08-55-2 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Tom Stinnett | CT D03 - North Region Materials Lab | 09/03/2021 | Julian Gonzales | Yes | 09/24/2021 | JMF 21-036 |
|
| 2021-07-08-55-3 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Tom Stinnett | CT D03 - North Region Materials Lab | 09/02/2021 | Julian Gonzales | Yes | 09/24/2021 | JMF 21-036 |
|
| 2021-07-08-55-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Tom Stinnett | CT D03 - North Region Materials Lab | 09/06/2021 | Julian Gonzales | Yes | 09/24/2021 | JMF 21-036 |
|
| 2021-07-08-55-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Mario Munoz | CT D03 - North Region Materials Lab | 09/03/2021 | Julian Gonzales | Yes | 09/24/2021 | JMF 21-036 |
|
| 2021-07-08-55-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Tom Stinnett | CT D03 - North Region Materials Lab | 09/06/2021 | Julian Gonzales | Yes | 09/24/2021 | JMF 21-036 |
|
| 2021-07-08-55-7 | CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index) | Julian Gonzales | CT D03 - North Region Materials Lab | 09/01/2021 | Julian Gonzales | Yes | 09/24/2021 | JMF 21-036 |
|
| 2021-07-08-55-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Tom Stinnett | CT D03 - North Region Materials Lab | 09/02/2021 | Julian Gonzales | Yes | 09/24/2021 | JMF 21-036 |
|
| 2021-07-08-55-9 | THIS TEST HAS BEEN SUPERSEDED.
AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Julian Gonzales | CT D03 - North Region Materials Lab | 09/01/2021 | Julian Gonzales | Yes | 09/24/2021 | THIS TEST HAS BEEN SUPERSEDED.
JMF 21-036 |
|
| 2021-07-08-55-10 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Julian Gonzales | CT D03 - North Region Materials Lab | 09/01/2021 | Julian Gonzales | Yes | 09/24/2021 | JMF 21-036 |
|
130532130533130534130535130536130540130541130543130547130580
