Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2021-09-22-14
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 215371 DEA: 042W1204 EFIS: 0421000139 |
DIST-CO-RTE-PM | 04-CC-580-6.9/7.8 |
Award Date | Not set |
Closeout Date | Not set |
Work Description | REPLACEMENT OF GUSSET PLATES AT VARIOUS LOCATIONS |
Location Description | Richmond San Rafael Bridge |
QA Service Level | 1 (Verified on 12/14/2020) |
Sample Information
Sample Taken Date | 09/22/2021 |
Sample Unique Key | 14 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 09/22/2021 |
Sample type | Quality Assurance |
A brief description of the sample | A325 Bolt |
The quantity of what the sample constitutes | 58 bolts |
From where was the sample collected | Other |
First name of sampler or witnessed by | Kevin |
Last name of sampler or witnessed by | Couch |
Title of sampler | MR |
Telephone number of sampler | 5304170632 |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | LeJeune Bolt Company |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | RSRB |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
Heat Number(s) | |
Nut Mfg. Lot Number(s) | n/a |
Washer Mfg. Lot Number(s) | n/a |
Bolt Specification | A325 |
Bolt Length(s) | 7.5 |
Nut Specification | n/a |
Washer Specification | n/a |
Finish | MG |
Diameter/Size | 1.125 |
Bolt Mfg. Lot Number | L129U1 |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2021-09-22-14-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | fsaylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | fsaylor | Yes | 10/01/2021 | A325 | |
2021-09-22-14-2 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | Fred Saylor | Yes | 10/01/2021 | | |
2021-09-22-14-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | Fred Saylor | Yes | 10/01/2021 | | |
2021-09-22-14-4 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | Fred Saylor | Yes | 10/01/2021 | | |
2021-09-22-14-5 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | Fred Saylor | Yes | 10/01/2021 | | |
2021-09-22-14-6 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | Fred Saylor | Yes | 10/01/2021 | | |
2021-09-22-14-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | Fred Saylor | Yes | 10/01/2021 | | |
2021-09-22-14-8 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | Fred Saylor | Yes | 10/01/2021 | | |
2021-09-22-14-9 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/29/2021 | Fred Saylor | Yes | 10/01/2021 | | |
131283131358131359131360131361131362131363131364131365