Sample Record
Owner Labs
- BSK Associates
- CT D04 - Hayward DME / District Laboratory
DIME Sample ID 2021-08-20-53
Project Information
Project Identifiers | Project ID: 214114 DEA: 040A5394 EFIS: 0418000244 |
---|---|
DIST-CO-RTE-PM | 04-SOL-80,12-11.4/12.8, 2.1/2.8 |
Award Date | Not set |
Closeout Date | 02/24/2023 |
Work Description | Widen EB SR-12 Connector, Construct 3 ramps & 2 box girder bridges, remove existing bridge, etc. |
Location Description | I-80/I-680/Route 12 Interchange |
QA Service Level | 1 (Verified on 04/23/2019) |
Sample Information
Sample Taken Date | 08/20/2021 | Sample Unique Key | 53 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 08/20/2021 |
Sample type | Verification | A brief description of the sample | 4 Bags of Mix Aggregates |
The quantity of what the sample constitutes | 4 Bags | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Tarech CA | Last name of sampler or witnessed by | CA |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Syar Indunsties Lake Herman Batch | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA or name of Pit) | 91-48-0002::LAKE HERMAN QUARRY |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Syar Vallejo | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
JMF Information
Verification ID | JMF3513-2021-80 | Date Created | 09/22/2021 |
---|---|---|---|
JMF Submittal ID | JMF3511-318-2021-98 | JMF Status | Submittal Accepted for Verification |
Producer Mix ID | 311101510-LD_0121 | Authorized Date | N/A |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|---|
2021-08-20-53-1 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Nicholas Shelly | CT D04 - Hayward DME / District Laboratory | 09/01/2021 | Babak Kamranimoghaddam | Yes | 09/22/2021 | ||
2021-08-20-53-2 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Nicholas Shelly | CT D04 - Hayward DME / District Laboratory | 09/01/2021 | Babak Kamranimoghaddam | Yes | 09/22/2021 | ||
2021-08-20-53-3 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Nicholas Shelly | CT D04 - Hayward DME / District Laboratory | 09/01/2021 | Babak Kamranimoghaddam | Yes | 09/22/2021 | ||
2021-08-20-53-4 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Nicholas Shelly | CT D04 - Hayward DME / District Laboratory | 08/31/2021 | Babak Kamranimoghaddam | Yes | 09/22/2021 | ||
2021-08-20-53-5 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Nicholas Shelly | CT D04 - Hayward DME / District Laboratory | 09/01/2021 | Babak Kamranimoghaddam | Yes | 09/22/2021 | ||
2021-08-20-53-6 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Randy Cortez | CT D04 - Hayward DME / District Laboratory | 09/01/2021 | Babak Kamranimoghaddam | Yes | 09/22/2021 | ||
2021-08-20-53-7 | THIS TEST HAS BEEN SUPERSEDED. AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis) | Nicholas Shelly | CT D04 - Hayward DME / District Laboratory | 09/08/2021 | Babak Kamranimoghaddam | Yes | 09/22/2021 | THIS TEST HAS BEEN SUPERSEDED. | |
2021-08-20-53-8 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Nicholas Shelly | CT D04 - Hayward DME / District Laboratory | 08/31/2021 | Babak Kamranimoghaddam | Yes | 09/22/2021 | ||
2021-08-20-53-9 | AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis) | Nicholas Shelly | CT D04 - Hayward DME / District Laboratory | 09/08/2021 | Babak Kamranimoghaddam | No | Info | ||
2021-08-20-53-10 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Nicholas Shelly | CT D04 - Hayward DME / District Laboratory | 08/31/2021 | Babak Kamranimoghaddam | Yes | 09/22/2021 |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2021-08-20-53-1 AASHTO T85-13 (Verified)
DIME Test ID: 2021-08-20-53-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-08-20-53-3 AASHTO T304-11 (Verified)
DIME Test ID: 2021-08-20-53-4 AASHTO T84-14 (Verified)
DIME Test ID: 2021-08-20-53-5 ASTM D4791-10 (Verified)
DIME Test ID: 2021-08-20-53-6 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-08-20-53-7 AASHTO T30-19 (Verified)
DIME Test ID: 2021-08-20-53-8 AASHTO T27-14 (Verified)
DIME Test ID: 2021-08-20-53-9 AASHTO T30-19
DIME Test ID: 2021-08-20-53-10 AASHTO T176-08 (Verified)
DIME Test ID: 2021-08-20-53-11 AASHTO T209-12 (Verified)