Owner Lab
- CT HQ - Sacramento Asphalt Binder Laboratory
DIME Sample ID 2021-09-13-27
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 215393 DEA: 021J5104 EFIS: 0220000086 |
DIST-CO-RTE-PM | 02-LAS,MOD-139-57.0/66.635,0.0/0.1 |
Award Date | 02/10/2021 |
Closeout Date | 11/24/2021 |
Work Description | PERFORM COLD IN-PLACE RECYCLING AND PLACE HOT MIX ASPHALT (TYPE A). |
Location Description | LASSEN AND MODOC COUNTIES NEAR ADIN FROM 4.5 MILES SOUTH OF COUNTY ROAD A2 TO 0.1 MILE SOUTH OF ROUTE 299 |
QA Service Level | 1 (Verified on 01/07/2021) |
Sample Information
Sample Taken Date | 09/13/2021 |
Sample Unique Key | 27 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 09/20/2021 |
Sample type | Acceptance |
A brief description of the sample | BINDER |
The quantity of what the sample constitutes | 1 can |
From where was the sample collected | Source |
First name of sampler or witnessed by | E |
Last name of sampler or witnessed by | CHAVEZ |
Title of sampler | MATLS |
Telephone number of sampler | |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | KLAMATH FALLS, OR |
Transportation Laboratory (TL) Number | c848969 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | Asphalt Binder |
Performance Grade | PG 58-34 M |
Modified | Yes |
Lot number | |
Sublot number | |
Tank number | |
Time of sample | |
HMA Supplier | CONTRACTOR HAT CREEK |
Asphalt Binder Supplier | Albina Asphalt - Klamath Falls Plant - Klamath Falls OR |
Multigrade | No |
Multigrade Type | |
HMA Design ID | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2021-09-13-27-1 | AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test) | Harish Thakur | CT HQ - Sacramento Asphalt Binder Laboratory | 09/23/2021 | Harish Thakur | Yes | 10/06/2021 | as per 2018 standard specs | |
2021-09-13-27-2 | AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Erika Gonzalez | CT HQ - Sacramento Asphalt Binder Laboratory | 09/23/2021 | Erika Gonzalez | Yes | 10/06/2021 | per 2018 standard specifications org | |
2021-09-13-27-3 | AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Erika Gonzalez | CT HQ - Sacramento Asphalt Binder Laboratory | 09/24/2021 | Erika Gonzalez | Yes | 10/06/2021 | per 2018 standard specifications rtfo | |
2021-09-13-27-4 | AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Erika Gonzalez | CT HQ - Sacramento Asphalt Binder Laboratory | 09/23/2021 | Erika Gonzalez | Yes | 10/06/2021 | rtfo+6 | |
2021-09-13-27-5 | AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Eva Torres | CT HQ - Sacramento Asphalt Binder Laboratory | 09/27/2021 | Eva Torres | Yes | 10/06/2021 | Per 2018 Standard Specifications pav | |
2021-09-13-27-6 | AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) | Ruben Macias | CT HQ - Sacramento Asphalt Binder Laboratory | 09/29/2021 | Ruben Macias | Yes | 10/06/2021 | Per 2018 Standard Specifications | |
130350130556130687130691131152131284