Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2021-09-17-10

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214099
DEA: 024F5904
EFIS: 0213000010
DIST-CO-RTE-PM02-TEH-5-R25.4
Award Date07/08/2020
Closeout Date08/14/2023
Work DescriptionBRIDGE SEISMIC RETROFIT AND SCOUR REPAIR.
Location DescriptionTEHAMA COUNTY IN RED BLUFF AT SACRAMENTO RIVER BRIDGE
QA Service Level1 (Verified on 05/07/2019)

Sample Information

Sample Taken Date09/17/2021 Sample Unique Key10
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing09/21/2021
Sample typeQuality Assurance A brief description of the sample7/8 " dia A325 HDG Fastener assemblies
The quantity of what the sample constitutes77 ea From where was the sample collectedFabricator
First name of sampler or witnessed byGreg Last name of sampler or witnessed byThompson
Title of samplerAssociate Steel Inspector Telephone number of sampler510-376-7155
Laboratory sample identification Linked DIME Sample ID2021-09-17-9
The fabricator/manufacturer/facility nameC K Johnson Transportation Laboratory (TL) NumberC658229
Inspector Lot Number from the Transportation Laboratory (TL) FormB9-062-21 Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)L748T1R
Heat Number(s)Bolt- 10671170 Nut- 800008882 Washer- 102021060 Nut Mfg. Lot Number(s)Nucor- 453592A
Washer Mfg. Lot Number(s)Technical Stamping- D9779 Bolt SpecificationF3125- A325-1
Bolt Length(s)2 1/4" Nut SpecificationA563
Washer SpecificationF436 FinishHDG
Diameter/Size7/8 " x 2 1/4" Bolt Mfg. Lot NumberFontana- L748T1
Rocap Test Requirement(s)yes Lubricant Requirements(s)yes

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-09-17-10-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory09/23/2021spaine
Yes
09/28/2021Nut Proof Load
2021-09-17-10-2ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory09/27/2021Steven Paine
Yes
09/28/2021
2021-09-17-10-3ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory09/27/2021Steven Paine
Yes
09/28/2021
2021-09-17-10-4ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory09/27/2021Steven Paine
Yes
09/28/2021
2021-09-17-10-5ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory09/27/2021Steven Paine
Yes
09/28/2021
2021-09-17-10-6ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory09/27/2021Steven Paine
Yes
09/28/2021
2021-09-17-10-7ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory09/27/2021Steven Paine
Yes
09/28/2021
2021-09-17-10-8ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory09/27/2021Steven Paine
Yes
09/28/2021
2021-09-17-10-9ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory09/27/2021Steven Paine
Yes
09/28/2021
2021-09-17-10-10ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory09/27/2021Steven Paine
Yes
09/28/2021

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-09-17-10-1 ASTM F606-14a (Verified)
DIME Test ID: 2021-09-17-10-2 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-09-17-10-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-09-17-10-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-09-17-10-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-09-17-10-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-09-17-10-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-09-17-10-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-09-17-10-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-09-17-10-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-09-17-10-11 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-17-10-12 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-17-10-13 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-17-10-14 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-17-10-15 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-17-10-16 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-17-10-17 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-17-10-18 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-17-10-19 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-17-10-20 ASTM E18-15 (Verified)
DIME Test ID: 2021-09-17-10-21 ASTM E18-15 (Verified)
DIME Test ID: 2021-09-17-10-22 ASTM E18-15 (Verified)
DIME Test ID: 2021-09-17-10-23 ASTM E18-15 (Verified)