Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2021-09-17-6

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 213568
DEA: 034H6904
EFIS: 0319000026
DIST-CO-RTE-PM03-SAC,SAC/SOL-12-0-0.4/26.3-26.4, 0.0-0.4/26.3-26.4
Award Date08/13/2018
Closeout Date08/28/2023
Work DescriptionMajor Damage Restoration (Emergency Opening)
Location DescriptionNot set
QA Service Level1 (Verified on 08/24/2018)

Sample Information

Sample Taken Date09/17/2021 Sample Unique Key6
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing09/21/2021
Sample typeQuality Assurance A brief description of the sample7/8 x 3 1/2" A325 HDG Bolts with Nuts and washers
The quantity of what the sample constitutes29 ea From where was the sample collectedFabricator
First name of sampler or witnessed byGreg Last name of sampler or witnessed byThompson
Title of samplerAssociate Steel Inspector Telephone number of sampler510-376-7155
Laboratory sample identification Linked DIME Sample ID2021-09-17-01
The fabricator/manufacturer/facility nameCK Johnson Industries Transportation Laboratory (TL) Numberc658228
Inspector Lot Number from the Transportation Laboratory (TL) FormB9-061-21 Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)L919S1R
Heat Number(s)Bolt- 10665860 Nut-8000008882 Washer- 12021060 Nut Mfg. Lot Number(s)Nucor -453592A
Washer Mfg. Lot Number(s)Technical Stamping- D9779 Bolt SpecificationAF3125 A325-1
Bolt Length(s)3 1/2" Nut SpecificationA563
Washer SpecificationF436 FinishHDG
Diameter/Size7/8"-9 x 3 1/2" Bolt Mfg. Lot NumberFontana Fastener- L919S1
Rocap Test Requirement(s)yes Lubricant Requirements(s)yes

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-09-17-6-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory09/23/2021spaine
Yes
09/28/2021A325 Wedge Tensile
2021-09-17-6-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory09/23/2021spaine
Yes
09/28/2021Nut Proof Load
2021-09-17-6-3ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory09/27/2021Steven Paine
Yes
09/28/2021
2021-09-17-6-4ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory09/27/2021Steven Paine
Yes
09/28/2021
2021-09-17-6-5ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory09/27/2021Steven Paine
Yes
09/28/2021
2021-09-17-6-6ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory09/27/2021Steven Paine
Yes
09/28/2021
2021-09-17-6-7ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory09/27/2021Steven Paine
Yes
09/28/2021
2021-09-17-6-8ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory09/27/2021Steven Paine
Yes
09/28/2021
2021-09-17-6-9ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory09/27/2021Steven Paine
Yes
09/28/2021

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-09-17-6-1 ASTM F606-14a (Verified)
DIME Test ID: 2021-09-17-6-2 ASTM F606-14a (Verified)
DIME Test ID: 2021-09-17-6-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-09-17-6-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-09-17-6-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-09-17-6-6 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-17-6-7 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-17-6-8 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-17-6-9 ASTM E18-15 (Verified)