Sample Record

Owner Lab

  • CT HQ - QASI Sacramento Field Office

DIME Sample ID 2021-09-10-6

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214099
DEA: 024F5904
EFIS: 0213000010
DIST-CO-RTE-PM02-TEH-5-R25.4
Award Date07/08/2020
Closeout Date08/14/2023
Work DescriptionBRIDGE SEISMIC RETROFIT AND SCOUR REPAIR.
Location DescriptionTEHAMA COUNTY IN RED BLUFF AT SACRAMENTO RIVER BRIDGE
QA Service Level1 (Verified on 05/07/2019)

Sample Information

Sample Taken Date09/10/2021 Sample Unique Key6
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing09/13/2021
Sample typeAcceptance A brief description of the sample1-8 x 3 A325 Hex Bolt HDG
The quantity of what the sample constitutes82 From where was the sample collectedFabricator
First name of sampler or witnessed bySherri Last name of sampler or witnessed byBrannon
Title of samplerQA Inspector Telephone number of sampler916-826-6371
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameCandK Johnson Ind Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormB22-087-21 Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)431133A
Heat Number(s)100100669 Nut Mfg. Lot Number(s)455386C
Washer Mfg. Lot Number(s)D8310 Bolt SpecificationASTM A325
Bolt Length(s)3 inches Nut SpecificationASTM A563
Washer SpecificationASTM F436 FinishHDG
Diameter/Size1 inch Bolt Mfg. Lot Number431133A
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-09-10-6-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)bewing, CT HQ - Sacramento Structural Materials Testing Laboratory09/15/2021bewing
Yes
09/15/2021A325 Bolt
2021-09-10-6-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)bewing, CT HQ - Sacramento Structural Materials Testing Laboratory09/15/2021bewing
Yes
09/15/2021A325 Bolt
2021-09-10-6-3ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)bewing, CT HQ - Sacramento Structural Materials Testing Laboratory09/15/2021bewing
Yes
09/15/2021Nut Proof
2021-09-10-6-4ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)bewing, CT HQ - Sacramento Structural Materials Testing Laboratory09/15/2021bewing
Yes
09/15/2021Nut Proof
2021-09-10-6-5ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory09/15/2021Fred Saylor
Yes
09/15/2021
2021-09-10-6-6ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory09/15/2021Fred Saylor
Yes
09/15/2021
2021-09-10-6-7ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory09/15/2021Fred Saylor
Yes
09/15/2021
2021-09-10-6-8ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory09/15/2021Fred Saylor
Yes
09/15/2021
2021-09-10-6-9ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory09/15/2021Fred Saylor
Yes
09/15/2021
2021-09-10-6-10ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory09/15/2021Fred Saylor
Yes
09/15/2021

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-09-10-6-1 ASTM F606-14a (Verified)
DIME Test ID: 2021-09-10-6-2 ASTM F606-14a (Verified)
DIME Test ID: 2021-09-10-6-3 ASTM F606-14a (Verified)
DIME Test ID: 2021-09-10-6-4 ASTM F606-14a (Verified)
DIME Test ID: 2021-09-10-6-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-09-10-6-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-09-10-6-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-09-10-6-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-09-10-6-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-09-10-6-10 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-10-6-11 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-10-6-12 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-10-6-13 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-10-6-14 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-10-6-15 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-10-6-16 ASTM B499-14 (Verified)
DIME Test ID: 2021-09-10-6-17 ASTM E18-15 (Verified)
DIME Test ID: 2021-09-10-6-18 ASTM E18-15 (Verified)