Owner Lab
- CT HQ - Sacramento Asphalt Binder Laboratory
DIME Sample ID 2021-08-24-35
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 215483
DEA: 022J0004
EFIS: 0221000017 |
|---|
| DIST-CO-RTE-PM | 02-PLU-49-0.0/7.5 |
|---|
| Award Date | 04/05/2021 |
|---|
| Closeout Date | 11/24/2021 |
|---|
| Work Description | PLACE HOT MIX ASPHALT (TYPE A). |
|---|
| Location Description | PLUMAS COUNTY AT AND NEAR VINTON FROM SIERRA COUNTY LINE TO ROUTE 70 |
|---|
| QA Service Level | 1 (Verified on 03/08/2021) |
|---|
Sample Information
| Sample Taken Date | 08/24/2021 |
Sample Unique Key | 35 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 09/01/2021 |
|---|
| Sample type | Acceptance |
A brief description of the sample | binder |
|---|
| The quantity of what the sample constitutes | 2 cans, #2 Test, |
From where was the sample collected | Source |
|---|
| First name of sampler or witnessed by | Erik |
Last name of sampler or witnessed by | Benson |
|---|
| Title of sampler | |
Telephone number of sampler | |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | Western NV Materials, Spanish Springs |
Transportation Laboratory (TL) Number | 897854 |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | Asphalt Binder |
Performance Grade | PG 64-28 M |
|---|
| Modified | Yes |
Lot number | |
|---|
| Sublot number | |
Tank number | |
|---|
| Time of sample | |
HMA Supplier | Western Nevada Materials |
|---|
| Asphalt Binder Supplier | Valero Marketing & Supply - Benicia CA |
Multigrade | No |
|---|
| Multigrade Type | |
HMA Design ID | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2021-08-24-35-1 | AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test) | Harish Thakur | CT HQ - Sacramento Asphalt Binder Laboratory | 09/07/2021 | Harish Thakur | Yes | 09/13/2021 | as per 2018 standard specs |
|
| 2021-08-24-35-2 | AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Eva Torres | CT HQ - Sacramento Asphalt Binder Laboratory | 09/06/2021 | Eva Torres | Yes | 09/13/2021 | Per 2018 Standard Specifications original |
|
| 2021-08-24-35-3 | AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Eva Torres | CT HQ - Sacramento Asphalt Binder Laboratory | 09/06/2021 | Eva Torres | Yes | 09/13/2021 | Per 2018 Standard Specifications RTFO |
|
| 2021-08-24-35-4 | AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Eva Torres | CT HQ - Sacramento Asphalt Binder Laboratory | 09/08/2021 | Eva Torres | Yes | 09/13/2021 | Per 2018 Standard Specifications PAV |
|
| 2021-08-24-35-5 | AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) | Harish Thakur | CT HQ - Sacramento Asphalt Binder Laboratory | 09/09/2021 | Harish Thakur | Yes | 09/13/2021 | as per 2018 standard specs |
|
| 2021-08-24-35-6 | AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Eva Torres | CT HQ - Sacramento Asphalt Binder Laboratory | 09/06/2021 | Eva Torres | Yes | 09/13/2021 | Per 2018 Standard Specifications rtfo+6 |
|
127910127927127931128644128463127933
