DIME » All Projects » Project - DEA: 021J4404 » Sample 2021-06-16-36 » Sample Details

Sample Record

Owner Lab

  • CT HQ - Sacramento Asphalt Binder Laboratory

DIME Sample ID 2021-06-16-36

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215250
DEA: 021J4404
EFIS: 0220000079
DIST-CO-RTE-PM02-MOD-299-20.0/23.1,23.5/24.5,33.5/37.5
Award Date12/14/2020
Closeout Date09/27/2021
Work DescriptionASPHALT RUBBER CHIP SEAL.
Location DescriptionMODOC COUNTY AT VARIOUS LOCATIONS FROM 1.8 MILES WEST OF ROUTE 139 TO 0.3 MILE WEST OF RATTLESNAKE CREEK BRIDGE
QA Service Level1 (Verified on 10/30/2020)

Sample Information

Sample Taken Date06/16/2021 Sample Unique Key36
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/24/2021
Sample typeAcceptance A brief description of the samplePG64-28M
The quantity of what the sample constitutes2 cans From where was the sample collectedSource
First name of sampler or witnessed byC Last name of sampler or witnessed byB
Title of samplerTET Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameAlbina - Klamath Falls, OR Transportation Laboratory (TL) Number768795
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 64-28 M
ModifiedYes Lot number
Sublot number Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierAlbina Asphalt - Klamath Falls Plant - Klamath Falls OR MultigradeNo
Multigrade Type Asphalt Binder Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-06-16-36-1AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)Harish Thakur, CT HQ - Sacramento Asphalt Binder Laboratory08/08/2021Harish Thakur
Yes
08/11/2021Per 2018 Standard Specifications
2021-06-16-36-2AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Erika Gonzalez, CT HQ - Sacramento Asphalt Binder Laboratory08/08/2021Erika Gonzalez
Yes
08/11/2021Per 2018 standard specifications
2021-06-16-36-3AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Erika Gonzalez, CT HQ - Sacramento Asphalt Binder Laboratory08/08/2021Erika Gonzalez
Yes
08/11/2021Per 2018 Standard Specifications +6C
2021-06-16-36-4AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)HT, CT HQ - Sacramento Asphalt Binder Laboratory08/09/2021Eva Torres
Yes
08/11/2021Per 2018 Standard Specifications PAV
2021-06-16-36-5AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)Ruben Macias, CT HQ - Sacramento Asphalt Binder Laboratory08/09/2021Ruben Macias
Yes
08/11/2021Per 2018 Standard Specifications

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-06-16-36-1 AASHTO T240-17 (Verified)
DIME Test ID: 2021-06-16-36-2 AASHTO T315-20 (Verified)
DIME Test ID: 2021-06-16-36-3 AASHTO T315-20 (Verified)
DIME Test ID: 2021-06-16-36-4 AASHTO T315-20 (Verified)
DIME Test ID: 2021-06-16-36-5 AASHTO T313-19 (Verified)