DIME - Sample Record for DIME Sample ID 2021-05-24-53

DIME » All Projects » Project - DEA: 024G4404 » Sample 2021-05-24-53 » Sample Details

Sample Record

Owner Lab

CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2021-05-24-53

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 215424 DEA: 024G4404 EFIS: 0214000013
DIST-CO-RTE-PM	02-SIS-3-38.0/38.6
Award Date	04/05/2021
Closeout Date	08/14/2023
Work Description	BRIDGE REPLACEMENT
Location Description	SISKIYOU COUNTY ABOUT 6 MILES NORTH OF FORT JONES FROM 0.3 MILE SOUTH TO 0.3 MILE NORTH OF LOWER MOFFETT CREEK ROAD
QA Service Level	1 (Verified on 01/19/2021)

Sample Information

Sample Taken Date	05/24/2021	Sample Unique Key	53
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/24/2021
Sample type	Verification	A brief description of the sample	Combined Untreated 3/4-inch Type A Virgin Aggregate
The quantity of what the sample constitutes	Verification of JMF 21-04-S01	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Devin	Last name of sampler or witnessed by	Owens
Title of sampler		Telephone number of sampler
Laboratory sample identification	D78808F	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Tullis - Nortstate Asphalt, Redding, CA	Transportation Laboratory (TL) Number	897297
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-45-0057
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Laboratory Batched from Sized Untreated Virgin Stockpile Samples
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	JMF 21-04-S01	Lot number
Sublot number		Aggregate Mix Number	Not set

JMF Information

Verification ID	JMF3513-2021-64	Date Created	08/02/2021
JMF Submittal ID	JMF3511-22-2021-81	JMF Status	Submittal Authorized For Use
Producer Mix ID	L210556	Authorized Date	08/13/2021

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date
2021-05-24-53-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	05/27/2021	Ward Jenkins	Yes	08/03/2021
2021-05-24-53-2	CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)	Terry McCormick, CT D02 - Redding Northern Regional Laboratory	06/01/2021	Ward Jenkins	Yes	08/03/2021
2021-05-24-53-3	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Karen Rios Dorado, CT D02 - Redding Northern Regional Laboratory	06/01/2021	Ward Jenkins	Yes	08/03/2021
2021-05-24-53-4	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Karen Rios Dorado, CT D02 - Redding Northern Regional Laboratory	05/28/2021	Ward Jenkins	Yes	08/03/2021
2021-05-24-53-5	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Terry McCormick, CT D02 - Redding Northern Regional Laboratory	06/02/2021	Ward Jenkins	Yes	08/03/2021
2021-05-24-53-6	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Karen Rios Dorado, CT D02 - Redding Northern Regional Laboratory	05/28/2021	Ward Jenkins	Yes	08/03/2021
2021-05-24-53-8	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Karen Rios Dorado, CT D02 - Redding Northern Regional Laboratory	05/28/2021	Ward Jenkins	Yes	08/03/2021
2021-05-24-53-9	AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)	Karen Rios Dorado, CT D02 - Redding Northern Regional Laboratory	05/28/2021	Ward Jenkins	Yes	08/03/2021
2021-05-24-53-10	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Terry McCormick, CT D02 - Redding Northern Regional Laboratory	06/01/2021	Ward Jenkins	Yes	08/03/2021
2021-05-24-53-11	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Karen Rios Dorado, CT D02 - Redding Northern Regional Laboratory	05/28/2021	Ward Jenkins	Yes	08/03/2021

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-05-24-53-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-05-24-53-2 CTM 204-June 2010 (Verified)
DIME Test ID: 2021-05-24-53-3 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-05-24-53-4 AASHTO T85-13 (Verified)
DIME Test ID: 2021-05-24-53-5 AASHTO T84-14 (Verified)
DIME Test ID: 2021-05-24-53-6 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-05-24-53-8 AASHTO T176-08 (Verified)
DIME Test ID: 2021-05-24-53-9 AASHTO T210-15 (Verified)
DIME Test ID: 2021-05-24-53-10 AASHTO T304-11 (Verified)
DIME Test ID: 2021-05-24-53-11 ASTM D4791-10 (Verified)