Sample Record

Owner Lab

  • CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2021-06-23-27

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214131
DEA: 080N69U4
EFIS: 0812000307
COOP: 081635
DIST-CO-RTE-PM08-RIV-60-22.1/22.6
Award Date05/01/2019
Closeout DateNot set
Work DescriptionImproving Operation efficiency and traffic flow in the SR-60 Truck Corridor in Moreno Valley. Widening inside and outside shoulders in 6 stages.
Location DescriptionR-60 Truck Climbing Lane . Construction of new east and west bound truck lanes from Gilman Springs road to 1.37 miles west if Jack Rabbit trail. Existing shoulders will be widened to standard 10 ft inside and 12 ft outside respectively.
QA Service Level2 (Verified on 04/30/2019)

Sample Information

Sample Taken Date06/23/2021 Sample Unique Key27
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/12/2021
Sample typeVerification A brief description of the sampleJMF 3/4" HMA-A-SP R15 No LAS
The quantity of what the sample constitutes5 Bags of Coldfeed, 3 Bags of RAP From where was the sample collectedManufacturer
First name of sampler or witnessed byRMA Last name of sampler or witnessed byGroup
Title of sampler Telephone number of sampler
Laboratory sample identification0406A-21 Linked DIME Sample ID
The fabricator/manufacturer/facility nameAll American Asphalt - Perris Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-33-0005
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R15 The fabricator/manufacturer designation for the sample
The plant number105927 A detailed description of where the material sample was collectedBelt Cut at All American Perris Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-06-23-27-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Satish Jain/Edmond JabbourCT D08 - Fontana Southern Regional Laboratory07/14/2021Satish Jain
Yes
07/23/2021Combined Virgin Aggregate Gradation
2021-06-23-27-2AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Friday OfoegbuCT D08 - Fontana Southern Regional Laboratory07/16/2021Satish Jain
Yes
07/23/2021
2021-06-23-27-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Larry DiazCT D08 - Fontana Southern Regional Laboratory07/16/2021Satish Jain
Yes
07/23/2021
2021-06-23-27-4AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Edmond JabbourCT D08 - Fontana Southern Regional Laboratory07/19/2021Satish Jain
Yes
07/23/2021
2021-06-23-27-5AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Larry DiazCT D08 - Fontana Southern Regional Laboratory07/16/2021Satish Jain
Yes
07/23/2021
2021-06-23-27-6AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Satish JainCT D08 - Fontana Southern Regional Laboratory07/18/2021Satish Jain
Yes
07/23/2021
2021-06-23-27-7AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Satish JainCT D08 - Fontana Southern Regional Laboratory07/18/2021Satish Jain
Yes
07/23/2021
2021-06-23-27-8ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Satish JainCT D08 - Fontana Southern Regional Laboratory07/18/2021Satish Jain
Yes
07/23/2021
2021-06-23-27-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesSatish JainCT D08 - Fontana Southern Regional Laboratory07/18/2021Satish Jain
Yes
07/23/2021Rap Gradation After Ignition
2021-06-23-27-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesSatish Jain/Edmond JabbourCT D08 - Fontana Southern Regional Laboratory07/19/2021Satish Jain
Yes
07/23/2021Combined RAP/Virgin Aggregate Gradation W/Correlation Factors

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-06-23-27-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-06-23-27-2 AASHTO T84-14 (Verified)
DIME Test ID: 2021-06-23-27-3 AASHTO T85-13 (Verified)
DIME Test ID: 2021-06-23-27-4 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-06-23-27-5 AASHTO T176-08 (Verified)
DIME Test ID: 2021-06-23-27-6 AASHTO T304-11 (Verified)
DIME Test ID: 2021-06-23-27-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-06-23-27-8 ASTM D4791-10 (Verified)
DIME Test ID: 2021-06-23-27-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2021-06-23-27-10 CTM 202-November 2011 (Verified)