DIME - Sample Record for DIME Sample ID 2021-06-30-27

DIME » All Projects » Project - DEA: 120K0234 » Sample 2021-06-30-27 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2021-06-30-27

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214951 DEA: 120K0234 EFIS: 1214000100
DIST-CO-RTE-PM	12-ORA-5-17.1/18.9
Award Date	09/23/2020
Closeout Date	Not set
Work Description	South County Improvement Project (Phase 3 - El Toro/Alicia) WIDEN FREEWAY AND BRIDGES, RECONSTRUCT BRIDGE AND WALLS.
Location Description	ORANGE COUNTY IN MISSION VIEJO, LAGUNA HILLS, LAGUNA WOODS AND LAKE FOREST FROM 0.4 MILE SOUTH OF ALICIA PARKWAY OVERCROSSING TO 0.2 MILE NORTH OF EL TORO ROAD UNDERCROSSING
QA Service Level	1 (Verified on 10/01/2020)

Sample Information

Sample Taken Date	06/30/2021	Sample Unique Key	27
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	07/12/2021
Sample type	Quality Assurance	A brief description of the sample	2-1/2 x 60
The quantity of what the sample constitutes	190	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Oscar	Last name of sampler or witnessed by	Vizcaino
Title of sampler		Telephone number of sampler	6787558969
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Madden Bolt	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)
Heat Number(s)	3105254	Nut Mfg. Lot Number(s)	DEAH DECN
Washer Mfg. Lot Number(s)	0121-699	Bolt Specification	ASTM F1554
Bolt Length(s)	60"	Nut Specification	ASTM A194-2H/ A563-DH
Washer Specification	ASTM F436	Finish	A153/A123 HDG
Diameter/Size	2.5"	Bolt Mfg. Lot Number	3105254
Rocap Test Requirement(s)		Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date
2021-06-30-27-1	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	07/14/2021	Fred Saylor	Yes	07/14/2021
2021-06-30-27-2	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	07/14/2021	Fred Saylor	Yes	07/14/2021
2021-06-30-27-3	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	07/14/2021	Fred Saylor	Yes	07/14/2021
2021-06-30-27-4	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	07/14/2021	Fred Saylor	Yes	07/14/2021
2021-06-30-27-5	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	07/14/2021	Fred Saylor	Yes	07/14/2021
2021-06-30-27-6	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	07/14/2021	Fred Saylor	Yes	07/14/2021
2021-06-30-27-7	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	07/14/2021	Fred Saylor	Yes	07/14/2021
2021-06-30-27-8	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	07/14/2021	Fred Saylor	Yes	07/14/2021
2021-06-30-27-9	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	07/14/2021	Fred Saylor	Yes	07/14/2021
2021-06-30-27-10	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	07/14/2021	Fred Saylor	Yes	07/14/2021

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-06-30-27-1 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-06-30-27-2 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-06-30-27-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-06-30-27-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-06-30-27-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-06-30-27-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-06-30-27-7 ASTM B499-14 (Verified)
DIME Test ID: 2021-06-30-27-8 ASTM B499-14 (Verified)
DIME Test ID: 2021-06-30-27-9 ASTM B499-14 (Verified)
DIME Test ID: 2021-06-30-27-10 ASTM B499-14 (Verified)
DIME Test ID: 2021-06-30-27-11 ASTM B499-14 (Verified)
DIME Test ID: 2021-06-30-27-12 ASTM B499-14 (Verified)
DIME Test ID: 2021-06-30-27-13 ASTM B499-14 (Verified)
DIME Test ID: 2021-06-30-27-14 ASTM B499-14 (Verified)
DIME Test ID: 2021-06-30-27-15 ASTM B499-14 (Verified)
DIME Test ID: 2021-06-30-27-16 ASTM E18-15 (Verified)
DIME Test ID: 2021-06-30-27-17 ASTM E18-15 (Verified)
DIME Test ID: 2021-06-30-27-18 ASTM E18-15 (Verified)
DIME Test ID: 2021-06-30-27-19 ASTM E18-15 (Verified)
DIME Test ID: 2021-06-30-27-20 ASTM A370-15 (Verified)
DIME Test ID: 2021-06-30-27-21 ASTM A370-15 (Verified)