Sample Record

Owner Lab

  • CT - Southern Regional Laboratory

DIME Sample ID 2021-06-23-22

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215148
DEA: 081E8404
EFIS: 0814000113
DIST-CO-RTE-PM08-RIV,SBD-62-R6.7/9.2,0.0/15.1,29.3/33.6
Award DateNot set
Closeout DateNot set
Work DescriptionREPLACE ROADWAY WITH RHMA-G AND HMA.
Location DescriptionIN RIVERSIDE AND SAN BERNARDINO COUNTIES IN AND NEAR YUCCA VALLEY AND IN TWENTYNINE PALMS FROM 0.2 MILE NORTH OF INDIAN CANYON DRIVE TO 0.6 MILE WEST OF UTAH TRAIL
QA Service Level1 (Verified on 03/18/2021)

Sample Information

Sample Taken Date06/23/2021 Sample Unique Key22
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/07/2021
Sample typeVerification A brief description of the sampleJMF 3/4" HMA-A-SP R22 0.75% LAS
The quantity of what the sample constitutes6 Bags Of Combined Agg., 4 Bags Rap From where was the sample collectedManufacturer
First name of sampler or witnessed byMatich Cabazon Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0403A-21 Linked DIME Sample ID
The fabricator/manufacturer/facility nameMatich Cabazon Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-33-0008::CABAZON QUARRY
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R22 The fabricator/manufacturer designation for the sample
The plant numberCHP 64D A detailed description of where the material sample was collectedBelt Cut at Matich Cabazon Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number JMF Verification ID

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-06-23-22-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Edmond Jabbour, Satish JainCT - Southern Regional Laboratory07/09/2021Satish Jain
Yes
07/14/2021Combined Virgin Aggregate Gradation
2021-06-23-22-2AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Danilo FerrerCT - Southern Regional Laboratory07/12/2021Satish Jain
Yes
07/14/2021
2021-06-23-22-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Michael MaganaCT - Southern Regional Laboratory07/13/2021Satish Jain
Yes
07/14/2021
2021-06-23-22-4AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Friday OfoegbuCT - Southern Regional Laboratory07/12/2021Satish Jain
Yes
07/14/2021
2021-06-23-22-5AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Satish JainCT - Southern Regional Laboratory07/11/2021Satish Jain
Yes
07/14/2021
2021-06-23-22-6AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Satish JainCT - Southern Regional Laboratory07/13/2021Satish Jain
Yes
07/14/2021
2021-06-23-22-7AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Satish JainCT - Southern Regional Laboratory07/13/2021Satish Jain
Yes
07/14/2021
2021-06-23-22-8ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Satish JainCT - Southern Regional Laboratory07/13/2021Satish Jain
Yes
07/14/2021
2021-06-23-22-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesSatish JainCT - Southern Regional Laboratory07/13/2021Satish Jain
Yes
07/14/2021Rap Gradation After Ignition
2021-06-23-22-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesSatish Jain/Edmond JabbourCT - Southern Regional Laboratory07/13/2021Satish Jain
Yes
07/14/2021Combined RAP/Virgin Aggregate Gradation W/Correlation Factors Applied