Sample Record

Owner Lab

  • CT HQ - QASI Bay Area Field Office

DIME Sample ID 2021-07-06-15

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214579
DEA: 010B0904
EFIS: 0100020444
DIST-CO-RTE-PM01-DN-101-8.2/8.7
Award Date04/21/2020
Closeout DateNot set
Work DescriptionPanther Creek & Hunter Creek Bridges
Location DescriptionDEL NORTE COUNTY NEAR KLAMATH AT PANTHER CREEK BRIDGE AND AT HUNTER CREEK BRIDGE
QA Service Level1 (Verified on 03/02/2020)

Sample Information

Sample Taken Date07/06/2021 Sample Unique Key15
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/23/2021
Sample typeAcceptance A brief description of the sampleA325 HDG Ro-cap
The quantity of what the sample constitutes358 From where was the sample collectedDistributor
First name of sampler or witnessed byChuck Last name of sampler or witnessed byFranco
Title of samplerQA Telephone number of sampler(858) 583-9270
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameCascade Bolt Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormS73-005-21 Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)R452406A
Heat Number(s)452406A, 449804A, 0920-584, 156889 Nut Mfg. Lot Number(s)449804A
Washer Mfg. Lot Number(s)159328 156889 Bolt SpecificationA325
Bolt Length(s)3-1/4" Nut SpecificationASTM A563
Washer SpecificationASTM F436 FinishASTM A153
Diameter/Size7/8-9" Bolt Mfg. Lot Number452406A
Rocap Test Requirement(s)ASTM F3125 Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-07-06-15-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)fsaylor, CT HQ - Sacramento Structural Materials Testing Laboratory07/27/2021fsaylor
Yes
07/28/2021A563
2021-07-06-15-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)fsaylor, CT HQ - Sacramento Structural Materials Testing Laboratory07/27/2021fsaylor
Yes
07/28/2021A563
2021-07-06-15-3ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)fsaylor, CT HQ - Sacramento Structural Materials Testing Laboratory07/27/2021fsaylor
Yes
07/28/2021A325
2021-07-06-15-4ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)fsaylor, CT HQ - Sacramento Structural Materials Testing Laboratory07/27/2021fsaylor
Yes
07/28/2021A325
2021-07-06-15-5ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory07/27/2021Fred Saylor
Yes
07/28/2021
2021-07-06-15-6ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory07/27/2021Fred Saylor
Yes
07/28/2021
2021-07-06-15-7ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory07/27/2021Fred Saylor
Yes
07/28/2021
2021-07-06-15-8ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory07/27/2021Fred Saylor
Yes
07/28/2021
2021-07-06-15-9ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory07/27/2021Fred Saylor
Yes
07/28/2021
2021-07-06-15-10ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory07/27/2021Fred Saylor
Yes
07/28/2021

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-07-06-15-1 ASTM F606-14a (Verified)
DIME Test ID: 2021-07-06-15-2 ASTM F606-14a (Verified)
DIME Test ID: 2021-07-06-15-3 ASTM F606-14a (Verified)
DIME Test ID: 2021-07-06-15-4 ASTM F606-14a (Verified)
DIME Test ID: 2021-07-06-15-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-07-06-15-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-07-06-15-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-07-06-15-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-07-06-15-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-07-06-15-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-07-06-15-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-07-06-15-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-07-06-15-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-07-06-15-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-07-06-15-15 ASTM B499-14 (Verified)
DIME Test ID: 2021-07-06-15-16 ASTM B499-14 (Verified)
DIME Test ID: 2021-07-06-15-17 ASTM B499-14 (Verified)
DIME Test ID: 2021-07-06-15-18 ASTM B499-14 (Verified)
DIME Test ID: 2021-07-06-15-19 ASTM B499-14 (Verified)
DIME Test ID: 2021-07-06-15-20 ASTM B499-14 (Verified)
DIME Test ID: 2021-07-06-15-21 ASTM B499-14 (Verified)
DIME Test ID: 2021-07-06-15-22 ASTM B499-14 (Verified)
DIME Test ID: 2021-07-06-15-23 ASTM B499-14 (Verified)
DIME Test ID: 2021-07-06-15-24 ASTM B499-14 (Verified)
DIME Test ID: 2021-07-06-15-25 ASTM B499-14 (Verified)
DIME Test ID: 2021-07-06-15-26 ASTM B499-14 (Verified)
DIME Test ID: 2021-07-06-15-27 ASTM B499-14 (Verified)
DIME Test ID: 2021-07-06-15-28 ASTM B499-14 (Verified)
DIME Test ID: 2021-07-06-15-29 ASTM B499-14 (Verified)
DIME Test ID: 2021-07-06-15-30 ASTM B499-14 (Verified)
DIME Test ID: 2021-07-06-15-31 ASTM B499-14 (Verified)
DIME Test ID: 2021-07-06-15-32 ASTM E18-15 (Verified)
DIME Test ID: 2021-07-06-15-33 ASTM E18-15 (Verified)
DIME Test ID: 2021-07-06-15-34 ASTM E18-15 (Verified)
DIME Test ID: 2021-07-06-15-35 ASTM E18-15 (Verified)
DIME Test ID: 2021-07-06-15-36 ASTM E18-15 (Verified)
DIME Test ID: 2021-07-06-15-37 ASTM E18-15 (Verified)