DIME - Sample Record for DIME Sample ID 2021-06-14-37

DIME » All Projects » Project - DEA: 021J4404 » Sample 2021-06-14-37 » Sample Details

Sample Record

Owner Lab

CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2021-06-14-37

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 215250 DEA: 021J4404 EFIS: 0220000079
DIST-CO-RTE-PM	02-MOD-299-20.0/23.1,23.5/24.5,33.5/37.5
Award Date	12/14/2020
Closeout Date	09/27/2021
Work Description	ASPHALT RUBBER CHIP SEAL.
Location Description	MODOC COUNTY AT VARIOUS LOCATIONS FROM 1.8 MILES WEST OF ROUTE 139 TO 0.3 MILE WEST OF RATTLESNAKE CREEK BRIDGE
QA Service Level	1 (Verified on 10/30/2020)

Sample Information

Sample Taken Date	06/14/2021	Sample Unique Key	37
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/15/2021
Sample type	Department Acceptance	A brief description of the sample	16 boxes of Lime Treated 1/2-inch Type A HMA (eq. PG 64-28 M) with 10.0% RAP and virgin PG 64-28 M binder from Albina - Klamath Falls
The quantity of what the sample constitutes	Production Start-Up Evaluation	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Cindy	Last name of sampler or witnessed by	Bryant
Title of sampler	TET	Telephone number of sampler
Laboratory sample identification	D78843	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Eagle Peak Rock and Paving – Alturas Plant (Alturas, CA)	Transportation Laboratory (TL) Number	853346
Inspector Lot Number from the Transportation Laboratory (TL) Form	Unknown	Structure unique identifier
Structure name	Not Applicable

Material Information

Material Type	Hot Mix Asphalt	HMA Type	Type A HMA
HMA Grading	1/2 inch	Lot number	Unknown
Sublot number	Unknown	HMA Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2021-06-14-37-1	AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Karen Dorado, CT D02 - Redding Northern Regional Laboratory	06/17/2021	Darrell Valasek	Yes	01/06/2022
2021-06-14-37-2	AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)	Colt Sweeny, CT D02 - Redding Northern Regional Laboratory	06/15/2021	Darrell Valasek	Yes	01/06/2022
2021-06-14-37-3	AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)	Colt Sweeny, CT D02 - Redding Northern Regional Laboratory	06/16/2021	Darrell Valasek	Yes	01/06/2022
2021-06-14-37-4	AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)	Terry McCormick, CT D02 - Redding Northern Regional Laboratory	06/23/2021	Darrell Valasek	Yes	01/06/2022	The void contents of some of the specimens were too low. The test was not rerun due to the presence of several other failing test results.
2021-06-14-37-5	AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)	Colt Sweeny, CT D02 - Redding Northern Regional Laboratory	06/16/2021	Ward Jenkins	Yes	01/06/2022	VMA = 19.1%, VFA = 62.5%, DP = 1.2
2021-06-14-37-6	CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt	Colt Sweeny, CT D02 - Redding Northern Regional Laboratory	06/21/2021	Ward Jenkins	Yes	01/06/2022	The air voids of the four specimens ranged from 7.5 to 8.0% and had heights ranging from 60.0 to 60.6 mm after 250 gyrations.

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-06-14-37-1 AASHTO T308-10 (Verified)
DIME Test ID: 2021-06-14-37-2 AASHTO T209-12 (Verified)
DIME Test ID: 2021-06-14-37-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2021-06-14-37-4 AASHTO T283-14 (Verified)
DIME Test ID: 2021-06-14-37-5 AASHTO T269-14 (Verified)
DIME Test ID: 2021-06-14-37-6 CTM 389-19 (Verified)