DIME - Sample Record for DIME Sample ID 2021-06-21-14

DIME » All Projects » Project - DEA: 061A9404 » Sample 2021-06-21-14 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Asphalt Binder Laboratory

DIME Sample ID 2021-06-21-14

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 215412 DEA: 061A9404 EFIS: 0620000141
DIST-CO-RTE-PM	06-FRE-5-20.0/21.0,30.9/37.3
Award Date	02/18/2021
Closeout Date	11/23/2021
Work Description	COLD PLANE AND REPLACE WITH RHMA (TYPE O).
Location Description	FRESNO COUNTY FROM 2 MILES NORTH OF ROUTE 5/33/145 SEPARATION TO SOUTH DERRIC AVENUE OVERCROSSING AND FROM 1 MILE NORTH OF ROUTE 5/33 SEPARATION TO 1.1 MILES SOUTH OF KAMM AVENUE OVERCROSSING
QA Service Level	1 (Verified on 01/25/2021)

Sample Information

Sample Taken Date	06/21/2021	Sample Unique Key	14
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/25/2021
Sample type	Acceptance	A brief description of the sample	Rubberized PG64-16
The quantity of what the sample constitutes	1 of 1 can	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Jose	Last name of sampler or witnessed by	Granite Tech
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Granite - Coalinga	Transportation Laboratory (TL) Number	c040386
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Asphalt Rubber Binder	Asphalt modifier supplier	San Joaquin Refining Co Inc
Performance Grade	PG 64-16	Lot number	2
Sublot number		Asphalt Rubber Binder Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2021-06-21-14-1	THIS TEST HAS BEEN SUPERSEDED. ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)	Minoo Ahmadi, CT HQ - Sacramento Asphalt Binder Laboratory	07/01/2021	Minoo Ahmadi	Yes	07/01/2021	THIS TEST HAS BEEN SUPERSEDED. 2018 per spec.
2021-06-21-14-2	ASTM D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements (Asphalt Pavement)	Minoo Ahmadi, CT HQ - Sacramento Asphalt Binder Laboratory	07/01/2021	Minoo Ahmadi	Yes	07/01/2021	Per 2018 standard specifications
2021-06-21-14-3	THIS TEST HAS BEEN SUPERSEDED. ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)	Minoo Ahmadi, CT HQ - Sacramento Asphalt Binder Laboratory	07/01/2021	Minoo Ahmadi	Yes	07/01/2021	THIS TEST HAS BEEN SUPERSEDED. 2018 per spec.
2021-06-21-14-4	ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)	Minoo Ahmadi, CT HQ - Sacramento Asphalt Binder Laboratory	07/01/2021	Juan Gomez	Yes	07/01/2021	Per 2018 standard specifications
2021-06-21-14-5	ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)	Minoo Ahmadi, CT HQ - Sacramento Asphalt Binder Laboratory	07/01/2021	Juan Gomez	Yes	07/01/2021	Per 2018 standard specifications

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-06-21-14-1 ASTM D217-16 (Verified)
DIME Test ID: 2021-06-21-14-2 ASTM D5329-16 (Verified)
DIME Test ID: 2021-06-21-14-3 ASTM D36-14ε1 (Verified)
DIME Test ID: 2021-06-21-14-4 ASTM D217-16 (Verified)
DIME Test ID: 2021-06-21-14-5 ASTM D36-14ε1 (Verified)