DIME - Sample Record for DIME Sample ID 2021-05-20-27

DIME » All Projects » Project - DEA: 021J4404 » Sample 2021-05-20-27 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Asphalt Binder Laboratory

DIME Sample ID 2021-05-20-27

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 215250 DEA: 021J4404 EFIS: 0220000079
DIST-CO-RTE-PM	02-MOD-299-20.0/23.1,23.5/24.5,33.5/37.5
Award Date	12/14/2020
Closeout Date	09/27/2021
Work Description	ASPHALT RUBBER CHIP SEAL.
Location Description	MODOC COUNTY AT VARIOUS LOCATIONS FROM 1.8 MILES WEST OF ROUTE 139 TO 0.3 MILE WEST OF RATTLESNAKE CREEK BRIDGE
QA Service Level	1 (Verified on 10/30/2020)

Sample Information

Sample Taken Date	05/20/2021	Sample Unique Key	27
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/24/2021
Sample type	Acceptance	A brief description of the sample	Rubberized PG64-16
The quantity of what the sample constitutes	two 1 gallon cans	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	L	Last name of sampler or witnessed by	B
Title of sampler	TET	Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	American Pavement Systems	Transportation Laboratory (TL) Number	c853345
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Asphalt Rubber Binder	Asphalt modifier supplier
Performance Grade	PG 64-16	Lot number
Sublot number		Asphalt Rubber Binder Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2021-05-20-27-1	THIS TEST HAS BEEN SUPERSEDED. ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)	Minoo Ahmadi, CT HQ - Sacramento Asphalt Binder Laboratory	07/01/2021	Minoo Ahmadi	Yes	07/01/2021	THIS TEST HAS BEEN SUPERSEDED. 2018 per spec.
2021-05-20-27-2	ASTM D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements (Asphalt Pavement)	Minoo Ahmadi, CT HQ - Sacramento Asphalt Binder Laboratory	07/01/2021	Minoo Ahmadi	Yes	07/01/2021	Per 2018 standard specifications
2021-05-20-27-3	THIS TEST HAS BEEN SUPERSEDED. ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)	Minoo Ahmadi, CT HQ - Sacramento Asphalt Binder Laboratory	07/01/2021	Minoo Ahmadi	Yes	07/01/2021	THIS TEST HAS BEEN SUPERSEDED. 2018 per spec.
2021-05-20-27-4	ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)	Minoo Ahmadi, CT HQ - Sacramento Asphalt Binder Laboratory	07/01/2021	Juan Gomez	Yes	07/01/2021	Per 2018 standard specifications
2021-05-20-27-5	ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)	Minoo Ahmadi, CT HQ - Sacramento Asphalt Binder Laboratory	07/01/2021	Juan Gomez	Yes	07/01/2021	Per 2018 standard specifications

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-05-20-27-1 ASTM D217-16 (Verified)
DIME Test ID: 2021-05-20-27-2 ASTM D5329-16 (Verified)
DIME Test ID: 2021-05-20-27-3 ASTM D36-14ε1 (Verified)
DIME Test ID: 2021-05-20-27-4 ASTM D217-16 (Verified)
DIME Test ID: 2021-05-20-27-5 ASTM D36-14ε1 (Verified)