Owner Lab
- CT D03 - North Region Materials Lab
DIME Sample ID 2021-04-12-65
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 215033 DEA: 033H6504 EFIS: 0318000027 |
DIST-CO-RTE-PM | 03-NEV-49-8.3/8.7 |
Award Date | 08/07/2020 |
Closeout Date | 09/23/2021 |
Work Description | CONSTRUCT A TWO-WAY LEFT-TURN LANE AND 8' SHOULDERS. |
Location Description | NEVADA COUNTY ON ROUTE 49 FROM 0.1 MILE SOUTH OF ROUND VALLEY ROAD TO 0.1 MILE NORTH OF QUAIL CREEK DRIVE |
QA Service Level | 1 (Verified on 06/22/2020) |
Sample Information
Sample Taken Date | 04/12/2021 |
Sample Unique Key | 65 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 04/13/2021 |
Sample type | Verification |
A brief description of the sample | 3/4" (Nominal) sized untreated Virgin Aggregate |
The quantity of what the sample constitutes | Three Bags |
From where was the sample collected | Source |
First name of sampler or witnessed by | KRC Personnel (SAMPLER) |
Last name of sampler or witnessed by | Thao Xiong (WITNESS) |
Title of sampler | Unknown |
Telephone number of sampler | Unknown |
Laboratory sample identification | JMF21-022 |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Knife River Construction - Hallwood |
Transportation Laboratory (TL) Number | C779131 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | 91-58-0002 |
The fabricator's/manufacturer's product name for the sample | Unknown |
The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown |
A detailed description of where the material sample was collected | HMA Plant Cold Feed |
Where the material sample would have been placed if not sampled | Unknown |
Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | |
Lot number | Unknown |
Sublot number | Unknown |
JMF Verification ID | JMF3513-2021-62 |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2021-04-12-65-1 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Jeff Herbert | CT D03 - North Region Materials Lab | 05/25/2021 | Kavon Rastegar | Yes | 06/22/2021 | JMF21-022. | |
2021-04-12-65-2 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Jeff Herbert | CT D03 - North Region Materials Lab | 05/25/2021 | Kavon Rastegar | Yes | 06/22/2021 | JMF21-022. | |
2021-04-12-65-3 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Julian Gonzales | CT D03 - North Region Materials Lab | 05/26/2021 | Kavon Rastegar | Yes | 06/22/2021 | JMF21-022. | |
2021-04-12-65-4 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Jeff Herbert | CT D03 - North Region Materials Lab | 05/25/2021 | Kavon Rastegar | Yes | 06/22/2021 | JMF21-022. | |
2021-04-12-65-5 | CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index) | Jeff Herbert | CT D03 - North Region Materials Lab | 05/25/2021 | Kavon Rastegar | Yes | 06/22/2021 | JMF21-022. | |
2021-04-12-65-6 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Julian Gonzales | CT D03 - North Region Materials Lab | 05/26/2021 | Kavon Rastegar | Yes | 06/22/2021 | JMF21-022. Report Only | |
2021-04-12-65-7 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Julian Gonzales | CT D03 - North Region Materials Lab | 05/27/2021 | Kavon Rastegar | Yes | 06/22/2021 | JMF21-022. | |
2021-04-12-65-8 | THIS TEST HAS BEEN SUPERSEDED. AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Kavon Rastegar | CT D03 - North Region Materials Lab | 05/24/2021 | Kavon Rastegar | Yes | 06/22/2021 | THIS TEST HAS BEEN SUPERSEDED. JMF21-022. Julian Gonzales | |
2021-04-12-65-9 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Julian Gonzales | CT D03 - North Region Materials Lab | 05/24/2021 | Kavon Rastegar | Yes | 06/22/2021 | JMF21-022. | |
116485116486116489116492116493116494116495116496116497