Sample Record

Owner Lab

  • CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2021-06-11-18

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215636
DEA: 09385804
EFIS: 0920000046
DIST-CO-RTE-PM09-KER-58-R129.4/R135.1,R143.2/R143.9
Award Date05/13/2021
Closeout Date08/31/2021
Work DescriptionCOLD PLANE AC PAVEMENT AND PLACE HMA.
Location DescriptionKERN COUNTY NEAR BORON FROM 0.3 MILE WEST OF EDWARDS AFB OVERCROSSING TO 1.3 MILES WEST OF TWENTY MULE TEAM OVERCROSSING AND FROM 0.7 MILE WEST OF SAN BERNARDINO COUNTY LINE TO SAN BERNARDINO COUNTY LINE
QA Service Level1 (Verified on 06/23/2021)

Sample Information

Sample Taken Date06/11/2021 Sample Unique Key18
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/17/2021
Sample typeVerification A brief description of the sampleJMF 3/4" HMA-A-SP R15, 1.0% LSM
The quantity of what the sample constitutes11 Bags Of Untreated Agg., 3 Bags Coldfeed agg., 2 Bags Rap From where was the sample collectedManufacturer
First name of sampler or witnessed byBlue Diamond Materials Victorville Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0369A-21 Linked DIME Sample ID
The fabricator/manufacturer/facility nameBlue Diamond Victorville Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-36-0046,91-36-0106
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R15 The fabricator/manufacturer designation for the sample
The plant number300154 LSM 70 10 A detailed description of where the material sample was collectedBelt Cut at Blue Diamond Victorville Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-06-11-18-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Satish Jain/Edmond Jabbour, CT D08 - Fontana Southern Regional Laboratory06/23/2021Satish Jain
Yes
07/06/2021Combined Lime Treated Aggregate Gradation
2021-06-11-18-2AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Sebastian Ferrer, CT D08 - Fontana Southern Regional Laboratory06/29/2021Satish Jain
Yes
07/06/2021
2021-06-11-18-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Larry Diaz, CT D08 - Fontana Southern Regional Laboratory06/24/2021Satish Jain
Yes
07/06/2021
2021-06-11-18-4AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Larry Diaz, CT D08 - Fontana Southern Regional Laboratory06/24/2021Satish Jain
Yes
07/06/2021
2021-06-11-18-5AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Satish Jain, CT D08 - Fontana Southern Regional Laboratory06/24/2021Satish Jain
Yes
07/06/2021
2021-06-11-18-6AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory06/25/2021Satish Jain
Yes
07/06/2021
2021-06-11-18-7AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory06/25/2021Satish Jain
Yes
07/06/2021
2021-06-11-18-8ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory06/25/2021Satish Jain
Yes
07/06/2021
2021-06-11-18-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesSatish Jain, CT D08 - Fontana Southern Regional Laboratory06/25/2021Satish Jain
Yes
07/06/2021Rap Gradation After Ignition
2021-06-11-18-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesSatish Jain/Dominic Montemayor, CT D08 - Fontana Southern Regional Laboratory06/30/2021Satish Jain
Yes
07/06/2021Combined RAP/Lime Treated Aggregate Gradation W/Correlation Factors Applied

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-06-11-18-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-06-11-18-2 AASHTO T84-14 (Verified)
DIME Test ID: 2021-06-11-18-3 AASHTO T85-13 (Verified)
DIME Test ID: 2021-06-11-18-4 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-06-11-18-5 AASHTO T176-08 (Verified)
DIME Test ID: 2021-06-11-18-6 AASHTO T304-11 (Verified)
DIME Test ID: 2021-06-11-18-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-06-11-18-8 ASTM D4791-10 (Verified)
DIME Test ID: 2021-06-11-18-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2021-06-11-18-10 CTM 202-November 2011 (Verified)