Sample Record

Owner Labs

  • CT HQ - Sacramento Aggregate Testing Laboratory
  • CT HQ - Sacramento Hot Mix Asphalt Laboratory

DIME Sample ID 2021-04-27-28

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214511
DEA: 010E0004
EFIS: 0113000091
DIST-CO-RTE-PM01-HUM-101-84.4/84.8
Award Date01/29/2020
Closeout Date11/22/2023
Work DescriptionBRIDGE RAIL REPLACEMENT.
Location DescriptionHUMBOLDT COUNTY NEAR ARCATA FROM JACOBY CREEK BRIDGE TO GANNON SLOUGH BRIDGE
QA Service Level1 (Verified on 11/13/2019)

Sample Information

Sample Taken Date04/27/2021 Sample Unique Key28
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/25/2021
Sample typeDispute Resolution A brief description of the sample1/2" HMA NO RAP
The quantity of what the sample constitutes_ From where was the sample collectedManufacturer
First name of sampler or witnessed by_ Last name of sampler or witnessed by_
Title of sampler Telephone number of sampler
Laboratory sample identification21-JMF-0102 Linked DIME Sample ID
The fabricator/manufacturer/facility nameMercer Fraser - Fortuna Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-12-0002
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedPlant
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size1/2 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-04-27-28-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory05/28/2021Bang Nguyen
Yes
06/07/2021
2021-04-27-28-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Jay Horton, CT HQ - Sacramento Aggregate Testing Laboratory06/04/2021Bang Nguyen
Yes
06/07/2021 - Crushed particles, coarse aggregate one fractured face. - Crushed particles, coarse aggregate two fractured faces. - Crushed particles, fine aggregate (Passing No. 4 sieve and retained on No. 8 sieve) one fractured face.
2021-04-27-28-3AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Jay Horton, CT HQ - Sacramento Aggregate Testing Laboratory06/02/2021Bang Nguyen
Yes
06/07/2021At 100 rev and 500 rev
2021-04-27-28-4AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory06/04/2021Bang Nguyen
Yes
06/07/2021
2021-04-27-28-5AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory06/04/2021Bang Nguyen
Yes
06/07/2021Method A
2021-04-27-28-6ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory06/09/2021Bang Nguyen
Yes
06/10/2021% by mass at 5:1
2021-04-27-28-7AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory06/02/2021Bang Nguyen
Yes
06/07/2021- Bulk specific gravity (oven dry) of coarse aggregate - Absorption o coarse aggregate
2021-04-27-28-8AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory06/02/2021Bang Nguyen
Yes
06/07/2021- Bulk specific gravity (SSD) of fine aggregate - Bulk specific gravity of fine aggregate - Bulk specific gravity of fine aggregate - Apparent specific gravity of supplemental fines - Absorption of fine aggregate

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-04-27-28-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-04-27-28-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-04-27-28-3 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-04-27-28-4 AASHTO T176-08 (Verified)
DIME Test ID: 2021-04-27-28-5 AASHTO T304-11 (Verified)
DIME Test ID: 2021-04-27-28-6 ASTM D4791-10 (Verified)
DIME Test ID: 2021-04-27-28-7 AASHTO T85-13 (Verified)
DIME Test ID: 2021-04-27-28-8 AASHTO T84-14 (Verified)