Sample Record

Owner Lab

  • CT HQ - Sacramento Asphalt Binder Laboratory

DIME Sample ID 2021-05-20-21

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215325
DEA: 101J1704
EFIS: 1018000179
DIST-CO-RTE-PM10-AMA-88-32.3/38.0
Award Date12/30/2020
Closeout Date08/30/2021
Work DescriptionHMA, TRAFFIC STRIPING, COLD PLANE AC AND RUMBLE STRIP.
Location DescriptionAMADOR COUNTY AT AND NEAR BARTON FROM 0.4 MILE WEST OF SILVER DRIVE TO 0.2 MILE WEST OF SHAKE RIDGE ROAD
QA Service Level1 (Verified on 11/23/2020)

Sample Information

Sample Taken Date05/20/2021 Sample Unique Key21
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/04/2021
Sample typeAcceptance A brief description of the samplePG64-28M
The quantity of what the sample constitutes 1 of 1 can From where was the sample collectedManufacturer
First name of sampler or witnessed byJ Last name of sampler or witnessed byKort
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameGeorge Reed - Clements Plant Transportation Laboratory (TL) Numberc034721
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 64-28 M
ModifiedYes Lot number1
Sublot number1 Tank number
Time of sample HMA SupplierGeorge Reed - Clements
Asphalt Binder SupplierValero Marketing & Supply - Benicia CA MultigradeNo
Multigrade TypeNot set HMA Design ID

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-05-20-21-1AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)Erika GonzalezCT HQ - Sacramento Asphalt Binder Laboratory06/07/2021Erika Gonzalez
Yes
06/11/2021per standard specifications
2021-05-20-21-2AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Eva TorresCT HQ - Sacramento Asphalt Binder Laboratory06/07/2021Eva Torres
Yes
06/11/2021ORG
2021-05-20-21-3AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Eva TorresCT HQ - Sacramento Asphalt Binder Laboratory06/07/2021Eva Torres
Yes
06/11/2021RTFO
2021-05-20-21-4AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Eva TorresCT HQ - Sacramento Asphalt Binder Laboratory06/07/2021Eva Torres
Yes
06/11/2021G*/Sin (delta) at 2.2 kPa is 60.9 degree estimated, < 80 max per spec.
2021-05-20-21-5AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Eva TorresCT HQ - Sacramento Asphalt Binder Laboratory06/09/2021Eva Torres
Yes
06/11/2021PAV
2021-05-20-21-6AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)Harish ThakurCT HQ - Sacramento Asphalt Binder Laboratory06/09/2021Harish Thakur
Yes
06/11/2021

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-05-20-21-1 AASHTO T240-17 (Verified)
DIME Test ID: 2021-05-20-21-2 AASHTO T315-16 (Verified)
DIME Test ID: 2021-05-20-21-3 AASHTO T315-16 (Verified)
DIME Test ID: 2021-05-20-21-4 AASHTO T315-16 (Verified)
DIME Test ID: 2021-05-20-21-5 AASHTO T315-16 (Verified)
DIME Test ID: 2021-05-20-21-6 AASHTO T313-19 (Verified)