Owner Lab
- HollyFrontier Asphalt Company LLC
DIME Sample ID 2021-05-18-36
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 44444
DEA: ASCP
EFIS: ASCP |
|---|
| DIST-CO-RTE-PM | 59--- |
|---|
| Award Date | Not set |
|---|
| Closeout Date | Not set |
|---|
| Work Description | Special project for submitting Sample information for Asphalt Supplier Certification Program. |
|---|
| Location Description | Not set |
|---|
| QA Service Level | NOT VERIFIED |
|---|
Sample Information
| Sample Taken Date | 05/18/2021 |
Sample Unique Key | 36 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 05/18/2021 |
|---|
| Sample type | Quality Control |
A brief description of the sample | Asphalt Binder |
|---|
| The quantity of what the sample constitutes | 2 quart cans, split sample |
From where was the sample collected | Supplier |
|---|
| First name of sampler or witnessed by | Thomas |
Last name of sampler or witnessed by | Ludlum |
|---|
| Title of sampler | COC Program |
Telephone number of sampler | |
|---|
| Laboratory sample identification | 21-106 |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | Holly Frontier Glendale, AZ |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | Asphalt Binder |
Performance Grade | PG 58-34 M |
|---|
| Modified | Yes |
Lot number | |
|---|
| Sublot number | |
Tank number | 502 |
|---|
| Time of sample | 8:15 AM/5-18-2021 |
HMA Supplier | |
|---|
| Asphalt Binder Supplier | Holly Frontier Asphalt Company - Glendale AZ |
Multigrade | No |
|---|
| Multigrade Type | Not set |
HMA Design ID | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2021-05-18-36-1 | AASHTO T228-09r13: Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials (Specific Gravity) | Thomas Ludlum | HollyFrontier Asphalt Company LLC | 05/18/2021 | Thomas Ludlum | Yes | 06/02/2021 | |
|
| 2021-05-18-36-2 | AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test) | Thomas Ludlum | HollyFrontier Asphalt Company LLC | 05/18/2021 | Thomas Ludlum | Yes | 06/02/2021 | |
|
| 2021-05-18-36-3 | AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) | Thomas Ludlum | HollyFrontier Asphalt Company LLC | 05/19/2021 | Thomas Ludlum | Yes | 06/02/2021 | |
|
| 2021-05-18-36-4 | AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Thomas Ludlum | HollyFrontier Asphalt Company LLC | 05/18/2021 | Thomas Ludlum | Yes | 06/02/2021 | |
|
| 2021-05-18-36-5 | AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Thomas Ludlum | HollyFrontier Asphalt Company LLC | 05/19/2021 | Thomas Ludlum | Yes | 06/02/2021 | |
|
| 2021-05-18-36-6 | AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear) | Thomas Ludlum | HollyFrontier Asphalt Company LLC | 05/18/2021 | Thomas Ludlum | Yes | 06/02/2021 | Pass/Fail Temp is 61.368 C, and phase angle @2.2kPa is calculated to be 62.4 degrees |
|
| 2021-05-18-36-7 | AASHTO T316-17: Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer | Thomas Ludlum | HollyFrontier Asphalt Company LLC | 05/18/2021 | Thomas Ludlum | Yes | 06/02/2021 | |
|
113980113981113982113984113985113988113990
