DIME » All Projects » Project - DEA: 030F2904 » Sample 2021-04-01-32 » Sample Details

Sample Record

Owner Lab

  • CT D03 - Olivehurst Northern Regional Laboratory

DIME Sample ID 2021-04-01-32

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215062
DEA: 030F2904
EFIS: 0314000101
DIST-CO-RTE-PM03-BUT-99-14.9/15.7
Award Date09/24/2020
Closeout Date03/02/2022
Work DescriptionCONSTRUCT BRIDGE AND ROADWAY; & REMOVE BRIDGE.
Location DescriptionBUTTE COUNTY ABOUT 10 MILES NORTH OF GRIDLEY FROM 0.3 MILE SOUTH TO 0.5 MILE NORTH OF NELSON AVENUE
QA Service Level1 (Verified on 07/20/2020)

Sample Information

Sample Taken Date04/01/2021 Sample Unique Key32
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/01/2021
Sample typeVerification A brief description of the sample3/4" (Nominal Size) Untreated Virgin Aggregate
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byTeichert Personnel (SAMPLER) Last name of sampler or witnessed by Brad McKeehan (WITNESS)
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample IDJMF21-020B
The fabricator/manufacturer/facility nameTeichert - Hallwood Plant Transportation Laboratory (TL) NumberC706327
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-58-0006::HALLWOOD PLANT
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedCold Feed
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

JMF Information

Verification IDJMF3513-2021-55 Date Created06/01/2021
JMF Submittal IDJMF3511-23-2021-68 JMF StatusSubmittal Authorized For Use
Producer Mix ID309-40432407-V Authorized Date09/10/2021

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-04-01-32-1AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Jeff HerbertCT D03 - Olivehurst Northern Regional Laboratory04/19/2021Kavon Rastegar
Yes
06/02/2021JMF21-020B.
2021-04-01-32-2AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Julian Gonzales CT D03 - Olivehurst Northern Regional Laboratory04/21/2021Kavon Rastegar
Yes
06/02/2021JMF21-020B.
2021-04-01-32-3AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Julian GonzalesCT D03 - Olivehurst Northern Regional Laboratory04/20/2021Kavon Rastegar
Yes
06/02/2021JMF21-020B.
2021-04-01-32-4AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Thomas Stinnett CT D03 - Olivehurst Northern Regional Laboratory04/16/2021Kavon Rastegar
Yes
06/02/2021JMF21-020B.
2021-04-01-32-5ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Kavon RastegarCT D03 - Olivehurst Northern Regional Laboratory04/16/2021Kavon Rastegar
Yes
06/02/2021JMF21-020B. Thomas Stinnett
2021-04-01-32-6CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Jeff HerbertCT D03 - Olivehurst Northern Regional Laboratory04/19/2021Kavon Rastegar
Yes
06/02/2021JMF21-020B.
2021-04-01-32-7AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Julian GonzalesCT D03 - Olivehurst Northern Regional Laboratory04/20/2021Kavon Rastegar
Yes
06/02/2021JMF21-020B.
2021-04-01-32-8AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Kavon RastegarCT D03 - Olivehurst Northern Regional Laboratory04/16/2021Kavon Rastegar
Yes
06/02/2021JMF21-020B. Thomas Stinnett
2021-04-01-32-9AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Julian GonzalesCT D03 - Olivehurst Northern Regional Laboratory04/15/2021Kavon Rastegar
Yes
06/02/2021JMF21-020B.

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-04-01-32-1 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-04-01-32-2 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-04-01-32-3 AASHTO T176-08 (Verified)
DIME Test ID: 2021-04-01-32-4 AASHTO T304-11 (Verified)
DIME Test ID: 2021-04-01-32-5 ASTM D4791-10 (Verified)
DIME Test ID: 2021-04-01-32-6 CTM 204-June 2010 (Verified)
DIME Test ID: 2021-04-01-32-7 AASHTO T85-13 (Verified)
DIME Test ID: 2021-04-01-32-8 AASHTO T84-14 (Verified)
DIME Test ID: 2021-04-01-32-9 AASHTO T27-14 (Verified)