Owner Lab
- CT - Southern Regional Laboratory
DIME Sample ID 2021-05-24-8
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 214620 DEA: 07309304 EFIS: 0714000281 |
DIST-CO-RTE-PM | 07-LA-210,405,605-Various |
Award Date | 03/18/2020 |
Closeout Date | Not set |
Work Description | REINFORCE STRUCTURAL CONCRETE BRIDGE AND PLACE RHMA SHOULDER PAVING. |
Location Description | LOS ANGELES COUNTY AT VARIOUS LOCATIONS |
QA Service Level | 1 (Verified on 04/15/2020) |
Sample Information
Sample Taken Date | 05/24/2021 |
Sample Unique Key | 8 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 05/25/2021 |
Sample type | Verification |
A brief description of the sample | PSUE 3/4" RHMA-G -SP 0.5% LAS |
The quantity of what the sample constitutes | 3 Bags Coldfeed Aggregate |
From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Gerardo |
Last name of sampler or witnessed by | Zubieta |
Title of sampler | |
Telephone number of sampler | |
Laboratory sample identification | 0303G-21 |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | All American Asphalt-Irwindale |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | 91-33-0005 |
The fabricator's/manufacturer's product name for the sample | 3/4 RHMA-G-SP |
The fabricator/manufacturer designation for the sample | |
The plant number | 106835 |
A detailed description of where the material sample was collected | Belt Cut at All American Irwindale Plant |
Where the material sample would have been placed if not sampled | Asphalt Paving |
Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | |
Lot number | |
Sublot number | |
JMF Verification ID | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2021-05-24-8-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Larry Diaz, Satish Jain | CT - Southern Regional Laboratory | 05/27/2021 | Michael Magana | Yes | 06/02/2021 | Combined Virgin Aggregate Gradation | |
2021-05-24-8-2 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Sebastian Ferrer | CT - Southern Regional Laboratory | 05/28/2021 | Michael Magana | Yes | 06/02/2021 | | |
2021-05-24-8-3 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Michael Magana | CT - Southern Regional Laboratory | 05/28/2021 | Michael Magana | Yes | 06/02/2021 | | |
2021-05-24-8-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Friday Ofoegbu | CT - Southern Regional Laboratory | 06/01/2021 | Michael Magana | Yes | 06/02/2021 | | |
2021-05-24-8-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Michael Magana | CT - Southern Regional Laboratory | 05/27/2021 | Michael Magana | Yes | 06/02/2021 | | |
2021-05-24-8-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain | CT - Southern Regional Laboratory | 05/28/2021 | Michael Magana | Yes | 06/02/2021 | | |
2021-05-24-8-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain | CT - Southern Regional Laboratory | 05/28/2021 | Michael Magana | Yes | 06/02/2021 | | |
2021-05-24-8-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain | CT - Southern Regional Laboratory | 05/28/2021 | Michael Magana | Yes | 06/02/2021 | | |
113948113949113950113951113952113953113954113955