Sample Record

Owner Lab

  • CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2021-05-03-20

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 211260
DEA: 072159U4
EFIS: 0715000160
DIST-CO-RTE-PM07-LA,ORA-5-0.0/1.5, 44.3/44.4
Award Date05/27/2016
Closeout Date08/01/2023
Work DescriptionCONSTRUCT HOV LANES AND MIX FLOW LANES.
Location DescriptionLOS ANGELES AND ORANGE COUNTIES IN BUENA PARK, LA MIRADA, CERRITOS AND SANTA FE SPRINGS FROM ARTESIA BOULEVARD UNDERCROSSING TO NORTH FORK COYOTE CREEK
QA Service Level1 (Verified on 03/16/2016)

Sample Information

Sample Taken Date05/03/2021 Sample Unique Key20
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/10/2021
Sample typeVerification A brief description of the samplePSUE 3/4" HMA-A-SP R21 0.5% LAS
The quantity of what the sample constitutes5 Bags of Combined Aggregate, 2 Bags of RAP From where was the sample collectedManufacturer
First name of sampler or witnessed byCesar Last name of sampler or witnessed byGomez
Title of samplerQC Telephone number of sampler
Laboratory sample identification0269A-21 Linked DIME Sample ID
The fabricator/manufacturer/facility nameVulcan - Irwindale Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-19-0035, 91-19-0016
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R21 The fabricator/manufacturer designation for the sample
The plant number220817A IRW SJR A detailed description of where the material sample was collectedBelt Cut at Vulcan Irwindale Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-05-03-20-1THIS TEST HAS BEEN SUPERSEDED.
AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Larry Diaz, CT D08 - Fontana Southern Regional Laboratory05/12/2021Satish Jain
Yes
05/17/2021THIS TEST HAS BEEN SUPERSEDED.
Combined Virgin Aggregate Gradation
2021-05-03-20-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Michael Magana, CT D08 - Fontana Southern Regional Laboratory05/13/2021Satish Jain
Yes
05/17/2021
2021-05-03-20-3THIS TEST HAS BEEN SUPERSEDED.
AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)
Larry Diaz, CT D08 - Fontana Southern Regional Laboratory05/13/2021Satish Jain
Yes
05/17/2021THIS TEST HAS BEEN SUPERSEDED.
2021-05-03-20-4THIS TEST HAS BEEN SUPERSEDED.
AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory05/13/2021Satish Jain
Yes
05/17/2021THIS TEST HAS BEEN SUPERSEDED.
2021-05-03-20-5AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Larry Diaz, CT D08 - Fontana Southern Regional Laboratory05/13/2021Satish Jain
Yes
05/17/2021
2021-05-03-20-6AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Larry Diaz, CT D08 - Fontana Southern Regional Laboratory05/13/2021Satish Jain
Yes
05/17/2021
2021-05-03-20-7ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Michael Magana, CT D08 - Fontana Southern Regional Laboratory05/13/2021Satish Jain
Yes
05/17/2021
2021-05-03-20-8AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Michael Magana, CT D08 - Fontana Southern Regional Laboratory05/13/2021Satish Jain
Yes
05/17/2021
2021-05-03-20-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesFriday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory05/13/2021Satish Jain
Yes
05/17/2021Rap Gradation After Ignition
2021-05-03-20-10THIS TEST HAS BEEN SUPERSEDED.
CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Larry Diaz, CT D08 - Fontana Southern Regional Laboratory05/13/2021Satish Jain
Yes
05/17/2021THIS TEST HAS BEEN SUPERSEDED.
Combined RAP/Virgin Aggregate Gradation W/Correlation Factors Applied

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-05-03-20-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-05-03-20-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-05-03-20-3 AASHTO T85-13 (Verified)
DIME Test ID: 2021-05-03-20-4 AASHTO T84-14 (Verified)
DIME Test ID: 2021-05-03-20-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-05-03-20-6 AASHTO T176-08 (Verified)
DIME Test ID: 2021-05-03-20-7 ASTM D4791-10 (Verified)
DIME Test ID: 2021-05-03-20-8 AASHTO T304-11 (Verified)
DIME Test ID: 2021-05-03-20-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2021-05-03-20-10 CTM 202-November 2011 (Verified)
DIME Test ID: 2021-05-03-20-11 AASHTO T27-14 (Verified)
DIME Test ID: 2021-05-03-20-12 AASHTO T85-13 (Verified)
DIME Test ID: 2021-05-03-20-13 AASHTO T84-14 (Verified)
DIME Test ID: 2021-05-03-20-14 CTM 202-November 2011 (Verified)