Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2021-05-05-7
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 214579 DEA: 010B0904 EFIS: 0100020444 |
DIST-CO-RTE-PM | 01-DN-101-8.2/8.7 |
Award Date | 04/21/2020 |
Closeout Date | Not set |
Work Description | BRIDGE REPLACEMENT |
Location Description | DEL NORTE COUNTY NEAR KLAMATH AT PANTHER CREEK BRIDGE AND AT HUNTER CREEK BRIDGE |
QA Service Level | 1 (Verified on 03/02/2020) |
Sample Information
Sample Taken Date | 05/05/2021 |
Sample Unique Key | 7 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 05/13/2021 |
Sample type | Acceptance |
A brief description of the sample | ASTM A449 All Thread Rod |
The quantity of what the sample constitutes | 112 |
From where was the sample collected | Fabricator |
First name of sampler or witnessed by | Gordon |
Last name of sampler or witnessed by | Livermore |
Title of sampler | QA inspector |
Telephone number of sampler | 916-753-0227 |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Thompson Metal Fab |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
Heat Number(s) | A202595 |
Nut Mfg. Lot Number(s) | |
Washer Mfg. Lot Number(s) | |
Bolt Specification | ASTM A449 |
Bolt Length(s) | 3'7" |
Nut Specification | na |
Washer Specification | na |
Finish | HDG |
Diameter/Size | 1.125 |
Bolt Mfg. Lot Number | 10937 |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2021-05-05-7-1 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/19/2021 | Fred Saylor | Yes | 05/26/2021 | | |
2021-05-05-7-2 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/19/2021 | Fred Saylor | Yes | 05/26/2021 | | |
2021-05-05-7-3 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/19/2021 | Fred Saylor | Yes | 05/26/2021 | | |
2021-05-05-7-4 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/19/2021 | Fred Saylor | Yes | 05/26/2021 | | |
2021-05-05-7-5 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/19/2021 | Fred Saylor | Yes | 05/26/2021 | | |
2021-05-05-7-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/19/2021 | Fred Saylor | Yes | 05/26/2021 | | |
2021-05-05-7-7 | ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | bewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/20/2021 | bewing | Yes | 05/26/2021 | | |
2021-05-05-7-8 | ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | <None> | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/20/2021 | <None> | Yes | 05/26/2021 | | |
112591112592112593112594112595112596112675112676