Sample Record

Owner Lab

  • CT HQ - Sacramento Asphalt Binder Laboratory

DIME Sample ID 2021-04-12-53

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 212501
DEA: 022E4804
EFIS: 0200000586
DIST-CO-RTE-PM02-SIS-96,263-103.1/103.6,56.8/57.2
Award Date12/14/2018
Closeout DateNot set
Work DescriptionBRIDGE REPLACEMENT
Location DescriptionSISKIYOU COUNTY ABOUT 8 MILES NORTH OF YREKA ON ROUTE 96 FROM 0.5 MILE WEST TO 0.2 MILE EAST OF ROUTE 263 AND ON ROUTE 263 FROM 0.3 MILE NORTH OF SHASTA RIVER BRIDGE #02-0014 TO ROUTE 96
QA Service Level1 (Verified on 06/06/2017)

Sample Information

Sample Taken Date04/12/2021 Sample Unique Key53
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/12/2021
Sample typeAcceptance A brief description of the samplePG58-34M
The quantity of what the sample constitutes2 of 2 cans From where was the sample collectedManufacturer
First name of sampler or witnessed byRanday Last name of sampler or witnessed byN/A
Title of samplerCGI Tech Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameJF Shea - Fawndale Transportation Laboratory (TL) Numberc897286
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 58-34 M
ModifiedYes Lot number
Sublot number Tank number
Time of sample HMA SupplierJF Shea - Fawndale
Asphalt Binder SupplierValero Marketing & Supply - Benicia CA MultigradeNo
Multigrade TypeNot set HMA Design ID

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-04-12-53-1AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)Harish ThakurCT HQ - Sacramento Asphalt Binder Laboratory05/04/2021Harish Thakur
Yes
05/21/2021as per 2018 standard specs
2021-04-12-53-2AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Eva TorresCT HQ - Sacramento Asphalt Binder Laboratory05/04/2021Eva Torres
Yes
05/21/2021Original
2021-04-12-53-3AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Erika GonzalezCT HQ - Sacramento Asphalt Binder Laboratory05/04/2021Eva Torres
Yes
05/21/2021RTFO
2021-04-12-53-4AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Eva TorresCT HQ - Sacramento Asphalt Binder Laboratory05/04/2021Eva Torres
Yes
05/21/2021Delta G/Sin* estimated 63.6 at 2.2 kPa
2021-04-12-53-5AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Eva TorresCT HQ - Sacramento Asphalt Binder Laboratory05/12/2021Eva Torres
Yes
05/21/2021PAV
2021-04-12-53-6AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)Ruben MaciasCT HQ - Sacramento Asphalt Binder Laboratory05/05/2021Ruben Macias
Yes
05/21/2021